OvmsDev

Download

ovmsdev@lists.openvehicles.com

August 2014

6 participants
12 discussions

Re: [Ovmsdev] OvmsDev Digest, Vol 31, Issue 1
by Aatheus 02 Aug '14

02 Aug '14

Mark, Fair point on the diag port being more of a 'power user' input. Regarding the SIM card, I was not able to get the card to register on the AT&T or T-mobile networks using my unlocked quad band phone. The registration timed out. It may in fact be my SIM. And no, the GSM lock is not set on the module. I was able to get some output using the 'diag' command. The signal strength bounces between 0 and 24 every few minutes. Also, the VIN is reported is random characters, plus part of the SIM's serial. This is on a 2014 LEAF S trim (US). Thanks, -Jeff On 08/01/2014 09:00 PM, ovmsdev-request(a)lists.teslaclub.hk wrote: > ------------------------------ > > Message: 2 > Date: Fri, 01 Aug 2014 10:54:52 +0200 > From: Michael Balzer <dexter(a)expeedo.de> > Subject: Re: [Ovmsdev] OvmsDev Digest, Vol 30, Issue 12 > To: ovmsdev(a)lists.teslaclub.hk > Message-ID: <53DB55DC.9070706(a)expeedo.de> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > Jeff, > > I think the diag port is not something a normal user should be > confronted with. The OVMS setup and troubleshooting is already quite > complex for a simple user. If you're able to use a serial port, you're > able to find and read the tech docs -- just my 2 cents. > > Now for your trace: is a GSM lock configured (parameter #13)? If so, try > without. > > Also, does the SIM work correctly in a mobile phone? > > Regards, > Michael > > > Am 01.08.2014 06:46, schrieb Aatheus: >> Mark, >> >> Thank you for the info. Can the serial port parameters get added to the >> helpme page? The info is not findable anywhere on the page. I did find >> it in the development PDF, but it was hard to find! >> >> I managed to get serial access to the OVMS board, and it looks like the >> data call is repeatedly failing. I verified that my GeoSIM card has $15 >> balance on it. Is my SIM card screwed up? I activated the SIM on the >> GeoSIM site, and I think it's set up ok. >> >> RDY >> >> +CFUN: 1 >> >> +CPIN: READY >> >> +PACSP: 1 >> >> +CREG: 0 >> >> +CREG: 2 >> >> Call Ready >> >> GPS Ready >> AT >> >> OK >> AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? >> >> +CSMINS: 0,1 >> >> OK >> AT+CCID;+CPBF="O-";+CPIN? >> >> (SERIAL OBSCURED) >> >> +CPIN: READY >> >> OK >> AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;+CLTS=1;E0 >> >> +IPR: 9600 >> >> OK >> >> ERROR >> >> +CREG: 3 >> >> +CREG: 0 >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> (SERIAL OBSCURED) >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> ERROR >> >> +CREG: 3 >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> (SERIAL OBSCURED) >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> ERROR >> >> >> >> _______________________________________________ >> OvmsDev mailing list >> OvmsDev(a)lists.teslaclub.hk >> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

1 0

Re: [Ovmsdev] OvmsDev Digest, Vol 30, Issue 12
by Aatheus 01 Aug '14

01 Aug '14

On 07/26/2014 08:22 AM, ovmsdev-request(a)lists.teslaclub.hk wrote: > Message: 2 > Date: Sat, 26 Jul 2014 09:30:47 +0200 > From: Michael Balzer <dexter(a)expeedo.de> > Subject: Re: [Ovmsdev] OVMS v2 startup weirdness > To: ovmsdev(a)lists.teslaclub.hk > Message-ID: <53D35927.5040304(a)expeedo.de> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > Hi Jeff, > > there's a really good trouble shooting guide on the OVMS website: > > http://www.openvehicles.com/helpme > > Also, serial port params are 9600 8N1, no handshake -- see OVMS > development PDF for more. > > Regards, > Michael > > > Am 26.07.2014 08:39, schrieb Aatheus: >> Hi all >> >> I just got my OVMS v2 module, with GeoSIM. I registered the SIM online, >> then tried to putting it into the OVMS SIM socket. I provisioned the >> module via the SMS provisioning page (using the +44 number). However, >> the board seems to be looping while trying to start up. >> >> The board blinks its version OK (2.6.5), then starts trying to connect. >> I see 10 green blinks for a few iterations. Then the board blinks 6 >> green for about a minute. Then both lights come on solid for about 15-20 >> seconds. Then a pause, then six blinks. Repeat until the end of time. >> This 6 blinks for a minute, solid on for 15-20 seconds, then 6 blinks >> loop never ends. >> >> What could be going on? I tried connecting to the diag port via serial >> (115k 8n1 none) and am getting nothing. I tried with hardware flow >> control on as well. Still nothing. I tried reflashing the board via >> PICkit2 and redoing the provisioning. Still no good. >> >> Thanks! >> -Jeff >> >> _______________________________________________ >> OvmsDev mailing list >> OvmsDev(a)lists.teslaclub.hk >> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev Mark, Thank you for the info. Can the serial port parameters get added to the helpme page? The info is not findable anywhere on the page. I did find it in the development PDF, but it was hard to find! I managed to get serial access to the OVMS board, and it looks like the data call is repeatedly failing. I verified that my GeoSIM card has $15 balance on it. Is my SIM card screwed up? I activated the SIM on the GeoSIM site, and I think it's set up ok. RDY +CFUN: 1 +CPIN: READY +PACSP: 1 +CREG: 0 +CREG: 2 Call Ready GPS Ready AT OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1 OK AT+CCID;+CPBF="O-";+CPIN? (SERIAL OBSCURED) +CPIN: READY OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;+CLTS=1;E0 +IPR: 9600 OK ERROR +CREG: 3 +CREG: 0 OK +CSMINS: 0,1 OK (SERIAL OBSCURED) +CPIN: READY OK +IPR: 9600 OK ERROR +CREG: 3 OK +CSMINS: 0,1 OK (SERIAL OBSCURED) +CPIN: READY OK +IPR: 9600 OK ERROR

2 1