Am 02.05.26 um 00:27 schrieb Craig Leres via OvmsDev:
On 5/1/26 14:19, Craig Leres via OvmsDev wrote:
I created /store/plugin and scp'ed partitioning.htm there. I can edit it via //#/edit
I could not get the plugin to use the html file I had scp'ed to /store/plugin so I used cut-n-paste to put it in the plugin editor plugin content box. I see in the final log that it created a /store/plugin/Partitioning directory but there are no files inside.
You probably made some mistake when copying to /store/plugin, as there normally are no directories in there.
After it copied the image to factory (and wanted to reboot), I clicked "Download" and got "Request error, please retry" (see attached). I clicked "Download" again and I watched from the serial while it rebooted. I could click download again but just get a log identical to the one that ends with "Request error, please retry".
Yes, the request error is irritating, I'll suppress that. It's the normal output of a command channel getting lost, here due to the reboot.
The download button was meant to be able to also download the initial command output, but it obviously can get misinterpreted, so I'll remove it. We won't need it anyway if we don't do the partition copy directly on command invocation.
Eventually I logged into module via ssh and could see that it had completed successfully. I logged back into the web gui and was able to download the entire log (Partition-upgrade(3).txt)
(It reminded me of the windows xp "task failed successfully" meme!)
With a little more patience, the web UI would have reloaded automatically and shown the final success page (after login).
I get from this that it's not sufficient to place the info on the update process…
The upgrade procedure runs*fully automatic*, you just need to start it. Depending on your configuration, the upgrade can take*up to 5 minutes*to finish, so please be patient.
In case something goes wrong, the module will reboot into standard mode, and you can use this page to display and download the upgrade log for further analysis.
…in the status info only. I'll split/move that into the dialog.
Regards, Michael
I see in the final log that it created a /store/plugin/Partitioning directory but there are no files inside.
Craig
** WARNING: connection is not using a post-quantum key exchange algorithm. ** This session may be vulnerable to "store now, decrypt later" attacks. ** The server may need to be upgraded. See https://openssh.com/pq.html
Welcome to the Open Vehicle Monitoring System (OVMS) - SSH Console Firmware: 3.3.005-853-g014e4be1/ota_0/main Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/3; MODEM SIM7600
OVMS# ota Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/3; MODEM SIM7600 Firmware: 3.3.005-853-g014e4be1/ota_0/main (build idf v3.3.4-854-g9063c8662 May 1 2026 13:45:48, product v3.3-5) Partition type: v3-35 (ota1, ota2, no factory, maximized store) Partition table: 0x8000 Running partition: ota_0 Boot partition: ota_0 OTA_O image: 3.3.005-853-g014e4be1
OvmsDev mailing list --ovmsdev@lists.openvehicles.com To unsubscribe send an email toovmsdev-leave@lists.openvehicles.com
-- Michael Balzer * Am Rahmen 5 * D-58313 Herdecke Fon 02330 9104094 * Handy 0176 20698926