On 5/1/26 14:19, Craig Leres via OvmsDev wrote:
I created /store/plugin and scp'ed partitioning.htm there. I can edit it via //#/edit
I could not get the plugin to use the html file I had scp'ed to /store/plugin so I used cut-n-paste to put it in the plugin editor plugin content box.
I see in the final log that it created a /store/plugin/Partitioning directory but there are no files inside.
After it copied the image to factory (and wanted to reboot), I clicked "Download" and got "Request error, please retry" (see attached). I clicked "Download" again and I watched from the serial while it rebooted. I could click download again but just get a log identical to the one that ends with "Request error, please retry".
Eventually I logged into module via ssh and could see that it had completed successfully. I logged back into the web gui and was able to download the entire log (Partition-upgrade(3).txt)
(It reminded me of the windows xp "task failed successfully" meme!)
The upgrade procedure runs fully automatic, you just need to start it. Depending on your configuration, the upgrade can take up to 5 minutes to finish, so please be patient.
In case something goes wrong, the module will reboot into standard mode, and you can use this page to display and download the upgrade log for further analysis.
I see in the final log that it created a /store/plugin/Partitioning directory but there are no files inside.
Craig
** WARNING: connection is not using a post-quantum key exchange algorithm.
** This session may be vulnerable to "store now, decrypt later" attacks.
** The server may need to be upgraded. See https://openssh.com/pq.html
Welcome to the Open Vehicle Monitoring System (OVMS) - SSH Console
Firmware: 3.3.005-853-g014e4be1/ota_0/main
Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/3; MODEM SIM7600
OVMS# ota
Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/3; MODEM SIM7600
Firmware: 3.3.005-853-g014e4be1/ota_0/main (build idf v3.3.4-854-g9063c8662 May 1 2026 13:45:48, product v3.3-5)
Partition type: v3-35 (ota1, ota2, no factory, maximized store)
Partition table: 0x8000
Running partition: ota_0
Boot partition: ota_0
OTA_O image: 3.3.005-853-g014e4be1
_______________________________________________ OvmsDev mailing list -- ovmsdev@lists.openvehicles.com To unsubscribe send an email to ovmsdev-leave@lists.openvehicles.com
-- Michael Balzer * Am Rahmen 5 * D-58313 Herdecke Fon 02330 9104094 * Handy 0176 20698926