Chris, I've now set up a test environment for CAN2 & 3 and have begun investigating the issue. I'll come back to you when I've fixed it. Regards, Michael Am 18.09.20 um 19:51 schrieb Michael Balzer:
Chris,
the fix isn't meant to eliminate bus errors, it just should solve the log errors.
I.e. you should now see exactly those frames in the TX log, that you transmit.
TX_Fail log entries can result from actual bus errors as well as from TX queue overflows.
TX queue overflows are counted separately, see can can3 status. If you have TX overflows, you need to raise the queue size.
Regards, Michael
Am 18.09.20 um 19:38 schrieb Chris van der Meijden:
I did a first test with mixed results.
I don't see the Asynchronous Errors anymore, but I see TX_FAIL messages and neither unlocking nor climate control works with the patch.
I will continue on monday with some deeper checks and I hope I can produce some log output then.
Regards
Chris
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26