Chris,

the fix isn't meant to eliminate bus errors, it just should solve the log errors.

I.e. you should now see exactly those frames in the TX log, that you transmit.

TX_Fail log entries can result from actual bus errors as well as from TX queue overflows.

TX queue overflows are counted separately, see can can3 status. If you have TX overflows, you need to raise the queue size.

Regards,
Michael

Am 18.09.20 um 19:38 schrieb Chris van der Meijden:

I did a first test with mixed results.

I don't see the Asynchronous Errors anymore, but I see TX_FAIL messages and neither unlocking nor climate control works with the patch.

I will continue on monday with some deeper checks and I hope I can produce some

log output then.

Regards

Chris

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26

_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
http://lists.openvehicles.com/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26