As the smart car community mostly uses the latest edge builds, some folks there have taken the leap already.
No real issues so far. Some user feedback:
…so: I puffed up my cheeks, held my breath, and just started the new partitioning with the latest Edge 857. It took a few minutes, rebooted smoothly, login as usual, message "0 errors and 0 problems."
The factory partition is now gone, ota0 and 1 are still there, but apparently larger now…
Looks great.
Thanks to the developers for this feat, for digging so deep into the module and cleaning things up so there's more space in the future 🙏🙏☺️
Partition upgrade performed without errors or warnings, followed immediately by the update to Edge 869. However, I had to reset the module after the partition upgrade by performing a power reset. Everything is running very stably. Many thanks to the developers! 👍
It worked for me too: first the update to version 869, then the partition upgrade without any problems or error messages. 👍👍👍👍
Regarding remaining space, we've got 39456 bytes left now.
On my list of things to potentially include in 3.3.006 are now only PR #1365 & #1381 adding support for the AWS IoT MQTT hub & the Amazon root cert, the latter also meant to solve the issues with ABRP. That's 4736 bytes combined.
Everyone please check if anything else needs to or should be included in 3.3.006.
Thanks & regards, Michael
Am 05.05.26 um 13:38 schrieb Michael Balzer via OvmsDev:
This is the user notification, sent via all channels:
The module is running an outdated flash partitioning scheme. OTA updates will soon stop working due to its 4MB size limit. Upgrading is recommended to leverage the limit to 7MB. To upgrade; open the web UI; menu Config -> Partitioning.
It changes to type alert & "have now stopped working" when trying to install a firmware image that doesn't fit.
The notification on the web UI's home page is basically the same, but with a button "Open Partitioning Tool" instead of the last line.
Regards, Michael
Am 05.05.26 um 09:12 schrieb Michael Balzer via OvmsDev:
Thanks for the test & feedback.
As for the user notification, these will activate on release 3.3.006. Please see my post on how to test them now -- as you already did the upgrade, you'll need to flash back to an old partitioning to see them.
Regards, Michael
Am 05.05.26 um 08:45 schrieb sharkcow via OvmsDev:
Worked for me as well, thank you for the great work!
But should we somehow notify users that action is necessary? I specifically looked for the item in the menu, but non-devs wouldn't know to do that?
sharkcow
Am 04.05.26 um 23:16 schrieb Craig Leres via OvmsDev:
On 5/4/26 06:35, Michael Balzer via OvmsDev wrote:
The partition upgrade web UI & user notifications are now included in build 3.3.005-857-g650f26406.
Worked sweet including the browser reconnect. Nice job!
Craig
OvmsDev mailing list -- ovmsdev@lists.openvehicles.com To unsubscribe send an email to ovmsdev-leave@lists.openvehicles.com
OvmsDev mailing list -- ovmsdev@lists.openvehicles.com To unsubscribe send an email to ovmsdev-leave@lists.openvehicles.com
-- Michael Balzer * Am Rahmen 5 * D-58313 Herdecke Fon 02330 9104094 * Handy 0176 20698926