Greg,
please be specific about the messages, were all of them naming version "3.3.006"?
Background: there have been multiple releases to EAP over the last days, but only the initial one was "3.3.006" without a suffix.
EAP is currently following EDGE due to the Smart EQ issue still needing changes to the release candidate. The latest update was yesterday, it's now at 3.3.006-57-g2035e13ac.
If you saw no sub version suffixes on later update notifications, do you have some log excerpt covering these update runs?
Regards, Michael
Am 30.05.26 um 05:19 schrieb Greg D.:
Hi folks,
I had enabled EAP updates some time (years?) ago, and with the recent release of 3.3.006 the module in my Roadster updated. And updated. And updated. Early in the AM of May 29th, the Android app's view of the message log shows 5 pairs of "New OTA firmware 3.3.006 is now being downloaded" followed by "OTA firmware 3.3.006 has been updated (OVMS will restart)". In the middle of the set is a notice that charging is done (it was actually done many hours before).
This also happened on May 257th, and the 27th.
The module seems to be working otherwise. Is this expected? How can I stop it?
I suspect this is has something to do with the image size / partitioning change, but I wasn't following that discussion very closely.
Thanks,
Greg
OvmsDev mailing list -- ovmsdev@lists.openvehicles.com To unsubscribe send an email to ovmsdev-leave@lists.openvehicles.com
-- Michael Balzer * Am Rahmen 5 * D-58313 Herdecke Fon 02330 9104094 * Handy 0176 20698926