I’ve committed a change to make both MAX7317 and MCP2515 10Mhz.
Regards, Mark.
On 18 Jan 2018, at 7:34 AM, Greg D. <gregd2350@gmail.com> wrote:
Still running! No issues that I can detect, though it's a fairly focused test: CAN-3 mostly, verified CAN-1 still connects to car.
Greg
Greg D. wrote:
Hi Mark,
Changed all three to 10mhz. I only have stuff hung off CAN3 right now, but the change to 10mhz seems to work. Wireshark shows that the inter-frame time for the back-to-back messages reduced from somewhere around 800 us to about 550us. Certainly helps!
Surprisingly, the variability between runs is a lot less than before. No idea why.
I'll let it run this way over night, with obd2ecu talking to OBDWiz, and report if any issues become apparent.
Greg
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev