OK so I should be compiling it myself then yes?
On 3/26/2016 4:07 AM, Michael Balzer wrote:
Robert,
no. The master repository still only has the outdated V0.2 Kia Soul module, that's not included in a build configuration by default.
Regards, Michael
Am 26.03.2016 um 00:56 schrieb Robert Cotran:
Hi guys,
This might be a real noob question, but the 2.8.5 firmware has 4 versions for the V2 hardware:
- experimental
- production
- RT production
- TR production
Would the Kia Soul EV code be part of the "production" version?
Thanks!
Robert
On 3/14/2016 7:01 AM, Mark Webb-Johnson wrote:
OK, everything looks good to go and I am going to give manufacturing go-ahead for a batch using SIM808 modules tonight.
The v2.8.5 firmware is required for SIM808 support, and I’ve built binaries of those ready for release.
Please play with this, and let us know if you find any issues.
Regards, Mark.
2016-03-14 2.8.5 Firmware 2.8.5 SIM808 GSM/GPS module support
Fix for Twizy build w/o BATTMON
Twizy: ideal range calculated with temperature influence
approximation
Twizy: Battery capacity estimation
Twizy: Charge start restarts SOC window (to get most recent BMS
SOC)
Twizy: Charge interruption no longer restarts power sums & SOC
window
Added vehicle_version to net msg "F"
New vehicle: Kia Soul EV, initial version 0.1 (alpha/untested)
Kia Soul: VIN, car status, doors & charging status, SOC,
estimated range, speed
Framework: OBDII polling support for modes 02, 10 & 21
Kia Soul: DEBUG diag output fixed for SMS size limit
Kia Soul: ISR optimization - OBD diag data init & length debugging
Kia Soul: Buffer overflow protection for OBDII multi frame polls
Kia Soul: Init CAN RX filter 1 to avoid noise triggers
Twizy: optional current limit modification
Added compiler switch OVMS_NO_CRASHDEBUG
Twizy V3.7.0: - CFG POWER: max current control, higher torque &
power levels
Framework v2.8.2: DIAG mode: support backspace & ctrl-a /
ctrl-c (= abort/clear)
Framework v2.8.2: DIAG mode perl clients added
Framework v2.8.2: DIAG mode documentation extended
Add hints on 0x100/0x96 and 0x400/0x01
Framework: Fixed base64decode(), removed bug workarounds
Framework: base64encode(): return pointer to end of base64 string
Framework: New net_assert_caller(): check caller, fallback to
REGPHONE
Framework: net_put RAM redirection now uses net_buf[]
Framework: Code cleanup, size and stack depth optimization
Framework: Fix: stack overflow/underflow flags cleared after crash
Framework: Perl diagmode clients: missing license info added
Twizy: Flux map optimization
Twizy: Fix: "CA?" outputs ETR SOC if ETR range is zero
Twizy: CAN control bits to disable emergency reset, kickdown &
autopower
Twizy: Flux & saturation maps added to documentation
Twizy: Updated SDO list & limits
MPLABX 3.1x support, and OVMS_BUILDCONFIG to show selected
build config in version strings
Add pics and docs on Tesla Model S new style DIAG connector
seen in late 2015 cars onwards
Re-work GPS initialisation for SIM808
Use AT+CGPSRST=0 for cold start of GPS
Fix SMS VERSION command
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev