…manifesting in "ota status" and web firmware page not being able to show the latest version & info. It seems the error always comes on the web page. On "ota status" it normally only comes once, then successive "ota status" calls work. Loading the web page seems to restart the cycle. I (695311) webserver: HTTP GET /cfg/firmware W (695361) net: DNS lookup on ovms.dexters-web.de failed err=200 D (695471) webserver: Serve /cfg/firmware: 9940 bytes used, 4171640 free OVMS# ota status Running partition: ota_1 Boot partition: ota_1 Firmware: 3.1.006-44-gd3fcb8b-dirty/ota_1/edge (build idf ovms-3.1.006-2-g1a1a544a Jun 13 2018 23:28:20) W (698871) net: DNS lookup on ovms.dexters-web.de failed err=200 OVMS# ota status Running partition: ota_1 Boot partition: ota_1 Firmware: 3.1.006-44-gd3fcb8b-dirty/ota_1/edge (build idf ovms-3.1.006-2-g1a1a544a Jun 13 2018 23:28:20) Server Available: 3.1.006-45-gd8220ef (is newer) OTA bleeding edge developer build Wed Jun 13 23:54:42 CEST 2018 See ovms3.log for details d8220ef - Web UI: simplified time zone region selection (vehicle config) d3fcb8b esp32can: Try draining rx fifo in main ESP32CAN_rxframe function This is brand new, has been working flawlessly before. Mark, can this be caused by the aggressive SPIMEM rework? Regards, Michael -- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26