…manifesting in "ota status" and web firmware page not being able to
show the latest version & info.
It seems the error always comes on the web page.
On "ota status" it normally only comes once, then successive "ota
status" calls work. Loading the web page seems to restart the cycle.
I (695311) webserver: HTTP GET /cfg/firmware
W (695361) net: DNS lookup on ovms.dexters-web.de failed
err=200
D (695471) webserver: Serve /cfg/firmware: 9940 bytes used,
4171640 free
OVMS# ota status
Running partition: ota_1
Boot partition: ota_1
Firmware: 3.1.006-44-gd3fcb8b-dirty/ota_1/edge (build
idf ovms-3.1.006-2-g1a1a544a Jun 13 2018 23:28:20)
W (698871) net: DNS lookup on ovms.dexters-web.de failed
err=200
OVMS# ota status
Running partition: ota_1
Boot partition: ota_1
Firmware: 3.1.006-44-gd3fcb8b-dirty/ota_1/edge (build
idf ovms-3.1.006-2-g1a1a544a Jun 13 2018 23:28:20)
Server Available: 3.1.006-45-gd8220ef (is newer)
OTA bleeding edge developer build Wed Jun 13 23:54:42 CEST
2018
See ovms3.log for details
d8220ef - Web UI: simplified time zone region selection
(vehicle config)
d3fcb8b esp32can: Try draining rx fifo in main
ESP32CAN_rxframe function
This is brand new, has been working flawlessly before. Mark, can
this be caused by the aggressive SPIMEM rework?
Regards,
Michael
--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26