On 4/17/26 01:27, Mark Webb-Johnson wrote:
The sequence that currently works is as follows:
- ota partitions store upgrade
- module reset (aka ‘reboot’)
- sd unmount
- ota partitions store migrate
- ota partitions upgrade factory
- module reset (aka ‘reboot’)
Worked fine on my dev module. First I rolled back to the 3 partition setup and made sure I was running gb7d9ad0d from the factory partition. Then I ejected the SD and followed your steps.
CraigOVMS# ota Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/3; MODEM SIM7600 Firmware: 3.3.005-826-gb7d9ad0d/ota_0/main (build idf v3.3.4-854-g9063c8662 Apr 17 2026 13:59:08) Partition type: v3-35 (ota1, ota2, no factory, maximized store) Partition table: 0x8000 Running partition: ota_0 Boot partition: ota_0 OTA_O image: 3.3.005-826-gb7d9ad0d OVMS# ota partitions list Partition table: Label Type Subtype Address Size nvs data nvs 0x00009000 16 KB otadata data ota 0x0000d000 8 KB phy_init data phy 0x0000f000 4 KB ota_0 app ota_0 0x00010000 7 MB ota_1 app ota_1 0x00710000 7 MB store data fat 0x00e10000 1984 KB Digest: 520877a00f2b1f7506844246b950ab23 pass