[Ovmsdev] Hyundai Kona Electric devs?

[Peter Lord]

> On 1 Feb 2023, at 17:09, Christos Oscar Kambiselis <ckambiselis at gmail.com> wrote:
> 
> I have, for my 2019 Kona Electric, the maps of the whole CAN bus network, pinouts of connectors and schematics of the wiring on PDF, these can all be found at service.hyundai-motor (dot) com, when accessed from Europe, the access costs 15€ for 24h or 60€ for a whole week, it's all official service manual info and much more for independent repair shops. I also have a couple of contactless CAN bus readers plus the direct connection to D-CAN through the OBD. My car only has the 8inch Standard Navi without the mobile data connection, but from the info I have gathered the only CAN bus connected to the larger "conected" navi is the same M-CAN that the standard version has, so the remote AC control should be possible, through M-CAN.


I’ve also got an early Kona :-)

Last time I took a look at the service site it only contained hardware details … so no PID details


> 
> I was thinking to connect the contactless readers to my logic analyzer plus one channel to a button to act as a marker, and record a known sequence of events, marking each event start with the button for easier searching. I also have access to 100kW DC fast chargers and 22kW AC chargers, including their CAN data when I have my car charging.
> 


Okay, that sounds like it would be useful :-)



--- 
Peter Lord 

  <mailto:peter at plord.co.uk>	  <https://signal.me/#p/+447867970260>	  <https://telegram.me/PeterLord>	  <https://github.com/plord12>	  <imessage://peter@plord.co.uk>	
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20230201/1f966140/attachment.htm>