[Ovmsdev] 3.2.018 release

Mark Webb-Johnson mark at webb-johnson.net
Mon Nov 22 08:25:12 HKT 2021

The ‘user interrupt’ is just the error code that comes back from the PPP driver when the cellular link goes down.

We’d really need a log file to see what the issue is.

Regards, Mark.

> On 21 Nov 2021, at 1:57 AM, Craig Leres <leres at xse.com> wrote:
> I updated my for-v3.3 build yesterday and booted it on my esp v3 board with the SIM7600 board. After running for a day, as usual, the simcom is not happy. Is this a side effect of not having hardware flow control for the modem uart?
> I remember we had the "User Interrupt" bug a long time ago but I don't remember the details or how that got fixed.
> 		Craig
> Welcome to the Open Vehicle Monitoring System (OVMS) - SSH Console
> Firmware: 3.2.017-112-g4af06660/ota_0/main
> Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/3
> OVMS# cel
> MODEM Status
>  Model: SIM7600
>  Network Registration: RegisteredRoaming
>    Provider: AT&T Hologram
>    Signal: -93 dBm
>    Mode: LTE,Online
>  State: NetLoss
>  Mux: Status up
>  PPP: Not connected
>     Last Error: User Interrupt
>  GPS: Connected on channel: #1
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.openvehicles.com
> http://lists.openvehicles.com/mailman/listinfo/ovmsdev

More information about the OvmsDev mailing list