Re: [Ovmsdev] OvmsDev Digest, Vol 93, Issue 26
That's good to hear, you power readings were very similar to mine. I pessimistically rounded up when the values were fluctuating. Where would be the best place to publish these readings in the documentation? Prior to measuring the power readings myself I tried to search for OVMS power consumption in the docs but could not find any results. How about adding a new section to readthedocs called "technical specs"? On Wed, 23 Oct 2019 at 18:32, <ovmsdev-request@lists.openvehicles.com> wrote:
Send OvmsDev mailing list submissions to ovmsdev@lists.openvehicles.com
To subscribe or unsubscribe via the World Wide Web, visit http://lists.openvehicles.com/mailman/listinfo/ovmsdev or, via email, send a message with subject or body 'help' to ovmsdev-request@lists.openvehicles.com
You can reach the person managing the list at ovmsdev-owner@lists.openvehicles.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of OvmsDev digest..."
Today's Topics:
1. Re: OVMS V3 power consumption readings (Mark Webb-Johnson) 2. Re: Kona electric and http routing (Peter Lord) 3. Re: Kona electric and http routing (Michael Balzer)
----------------------------------------------------------------------
Message: 1 Date: Wed, 23 Oct 2019 21:31:16 +0800 From: Mark Webb-Johnson <mark@webb-johnson.net> To: OVMS Developers <ovmsdev@lists.openvehicles.com> Subject: Re: [Ovmsdev] OVMS V3 power consumption readings Message-ID: <29BFF543-9FDC-4EF7-A8B8-1F8ED92FCDD8@webb-johnson.net> Content-Type: text/plain; charset="utf-8"
Glyn,
Powered exclusively by ext12v, @12v, I get:
Wifi off/sleeping: 25mA Wifi only: 49mA Wifi + 3G: 85mA
Powered exclusively by USB, @5v, I get:
Wifi off/sleeping: 46mA Wifi only: 104mA Wifi + 3G: 180mA
Note that in areas of low signal, the 3G power consumption can be higher. Similarly, if GPS is enabled that can have an affect as well. I?ve never seen it go over about 220mA (and even that was just for short bursts).
If I power it from both USB and 12V simultaneously, I get:
Wifi off/sleeping: 8mA (USB 5v) and 19mA (ext 12v) Deep sleep: 8mA (USB 5v) and <1mA (ext 12v)
(The 8mA is mostly from the CP2102 which is powered off when not in use)
Regards, Mark
On 22 Oct 2019, at 2:41 AM, Glyn Hudson <glyn.hudson@openenergymonitor.org> wrote:
I've just measured the power consumption of the OVMS V3 module using a bench power supply set to exactly 12.0V.
OVMS consumed:
60mA = 0.72W with WiFi on (AP active) and GSM/GPS modem off 100mA = 1.2W with everything switched on.
This is less than I was expecting, I would take weeks for OVMS to drain a healthy lead acid battery.
-- All the best,
Glyn Hudson +44(0)1248672607
https://openenergymonitor.org https://zerocarbonadventures.co.uk _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
Sure. A techspecs kind of section sounds fine. Regards, Mark.
On 24 Oct 2019, at 7:09 AM, Glyn Hudson <glyn.hudson@openenergymonitor.org> wrote:
That's good to hear, you power readings were very similar to mine. I pessimistically rounded up when the values were fluctuating.
Where would be the best place to publish these readings in the documentation? Prior to measuring the power readings myself I tried to search for OVMS power consumption in the docs but could not find any results.
How about adding a new section to readthedocs called "technical specs"?
On Wed, 23 Oct 2019 at 18:32, <ovmsdev-request@lists.openvehicles.com> wrote:
Send OvmsDev mailing list submissions to ovmsdev@lists.openvehicles.com
To subscribe or unsubscribe via the World Wide Web, visit http://lists.openvehicles.com/mailman/listinfo/ovmsdev or, via email, send a message with subject or body 'help' to ovmsdev-request@lists.openvehicles.com
You can reach the person managing the list at ovmsdev-owner@lists.openvehicles.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of OvmsDev digest..."
Today's Topics:
1. Re: OVMS V3 power consumption readings (Mark Webb-Johnson) 2. Re: Kona electric and http routing (Peter Lord) 3. Re: Kona electric and http routing (Michael Balzer)
----------------------------------------------------------------------
Message: 1 Date: Wed, 23 Oct 2019 21:31:16 +0800 From: Mark Webb-Johnson <mark@webb-johnson.net> To: OVMS Developers <ovmsdev@lists.openvehicles.com> Subject: Re: [Ovmsdev] OVMS V3 power consumption readings Message-ID: <29BFF543-9FDC-4EF7-A8B8-1F8ED92FCDD8@webb-johnson.net> Content-Type: text/plain; charset="utf-8"
Glyn,
Powered exclusively by ext12v, @12v, I get:
Wifi off/sleeping: 25mA Wifi only: 49mA Wifi + 3G: 85mA
Powered exclusively by USB, @5v, I get:
Wifi off/sleeping: 46mA Wifi only: 104mA Wifi + 3G: 180mA
Note that in areas of low signal, the 3G power consumption can be higher. Similarly, if GPS is enabled that can have an affect as well. I?ve never seen it go over about 220mA (and even that was just for short bursts).
If I power it from both USB and 12V simultaneously, I get:
Wifi off/sleeping: 8mA (USB 5v) and 19mA (ext 12v) Deep sleep: 8mA (USB 5v) and <1mA (ext 12v)
(The 8mA is mostly from the CP2102 which is powered off when not in use)
Regards, Mark
On 22 Oct 2019, at 2:41 AM, Glyn Hudson <glyn.hudson@openenergymonitor.org> wrote:
I've just measured the power consumption of the OVMS V3 module using a bench power supply set to exactly 12.0V.
OVMS consumed:
60mA = 0.72W with WiFi on (AP active) and GSM/GPS modem off 100mA = 1.2W with everything switched on.
This is less than I was expecting, I would take weeks for OVMS to drain a healthy lead acid battery.
-- All the best,
Glyn Hudson +44(0)1248672607
https://openenergymonitor.org https://zerocarbonadventures.co.uk _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
participants (2)
-
Glyn Hudson -
Mark Webb-Johnson