Hi, yes i will sell them. The V1 and the V2. The V1 has the TR Connector. The V2 has the OBD-II Connector. Bye Michael

Am 19.07.2017 um 15:33 schrieb Pierre-Yves Gilton <py.gilton@gmail.com>:

Hi,

Ok, so what about the availability of the v3 for Ampera ? What are the additional functionalities of V3 vs V2 for ampera ? @Michael J, do you sell your V2 module if you can't use it ?

Thank you. Regards, PY

2017-07-19 14:42 GMT+02:00 Michael Jochum <mikeljo@me.com <mailto:mikeljo@me.com>>: Hi,

thank you :)

But: "Unfortunately" I no longer have the Volt ;). Now i drive Tesla. :-)) But still have the Tools, Sources etc. for the Volt Part, so i think i can help (a little bit).

BTW: i still have an OVMS V1 and V2 Module that i can't use in the Model S.

Bye Michael

...

Am 19.07.2017 um 12:07 schrieb Michael Balzer <dexter@dexters-web.de <mailto:dexter@dexters-web.de>>:

Hi PY,

yes, V3 will be compatible with all vehicles currently supported, so also the Volt/Ampera.

Thanks for your beta test offering, the Volt/Ampera developer Michael Jochum has been informed :)

Regards, Michael

Am 17.07.2017 um 14:12 schrieb py.gilton@gmail.com <mailto:py.gilton@gmail.com>:

...

Hello, I'm looking for an OVMS module compatible with my 2012 Opel Ampera. I understood that ovms v3 is on the point of being available ; so I plan to wait the 3rd version. But will it be compatible with opel ampera ? If you need tester on this car don't hesitate ! Thank you. PY Gilton

-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26