OVMS auxiliary mod (Think City)
Hi all! Just wanted to share a fee pics of how the control of auxiliary (5V-to-12V logic) was implemented in my OVMS-module. All fit inside the box. Maybe this could be implemented in Ovms HW v.3? However, I'm very pleased at this moment, being able to start preheating of my Think City during the cold winter season. Doorlock control is not that usefull, but quite a cool demo :) At the same time I would like to thank Mark (and other key-persons involved), who put so much effort in this project. Hilsen Håkon (mobilmail)
Håkon, Cool. Very cool. Can you send me the circuit diagram for this? I'll see if we can do something similar as standard in future hardware. Regards, Mark
On 23 Nov, 2013, at 6:04 pm, Håkon Markussen <hakon.markussen@gmail.com> wrote:
Hi all!
Just wanted to share a fee pics of how the control of auxiliary (5V-to-12V logic) was implemented in my OVMS-module. All fit inside the box.
Maybe this could be implemented in Ovms HW v.3?
However, I'm very pleased at this moment, being able to start preheating of my Think City during the cold winter season. Doorlock control is not that usefull, but quite a cool demo :)
At the same time I would like to thank Mark (and other key-persons involved), who put so much effort in this project.
<bilde 1.JPG>
<bilde 2.JPG>
<bilde 3.JPG>
Hilsen Håkon (mobilmail) _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
participants (2)
-
Håkon Markussen -
Mark Webb-Johnson