Is it possible to use the net.h net_req_notification_error() system. That can be used to send an error code, and associated data, to the server. The server applies a lookup table to convert the error code to error message (per vehicle model), and then sends the alert out as a push notification to the Apps.

Regards, Mark.

On 22 Aug, 2013, at 4:30 AM, Håkon Markussen <hakon.markussen@gmail.com> wrote:

Hi,

I'm trying to create a fault/error SMS function for the vehicle_thinkcity.c The idea is making a two columns array, where the first column keeps different alarm messages available, while the second column keeps the state-variables of the corresponding error. Later on, only active errors, which has it's state-variable flag set, will be sent in the SMS (and the number of active errors).

Unfortunately my code did not work, and I therefor ask you for some help.

The code is currently: void vehicle_thinkcity_fault_prepmsg(void) {

rom char vehicle_thinkcity_fault_txttable[][] = { "MnyFailCel", // -> tc_bit_manyfailedcells; "Crash", // -> tc_bit_crash; "GenErr", // -> tc_bit_generalerr; "IsoErr", // -> tc_bit_isoerr; "IntIso", // -> tc_bit_intisoerr; "ExtIso", // -> tc_bit_extisoerr; "ThermIso", // -> tc_bit_thermalisoerr; "EmgEPO", // -> tc_bit_epoemerg; "ChgWaitTemp", // -> tc_bit_chgwaittemp; "ReachEOC", // -> tc_bit_reacheocplease; "WaitOkTpDcg", // -> tc_bit_waitoktmpdisch; "CrgWaitTp2", // -> tc_bit_chgwaitttemp2; "NoChgCur", // -> tc_bit_nochgcurr; "ChgOverVolt", // -> tc_bit_chgovervolt; "ChgOverCur", // -> tc_bit_chgovercurr; "" };

rom char vehicle_thinkcity_fault_vartable[] = 

{ tc_bit_manyfailedcells, tc_bit_crash, tc_bit_generalerr, tc_bit_isoerr, tc_bit_intisoerr, tc_bit_extisoerr, tc_bit_thermalisoerr, tc_bit_epoemerg, tc_bit_chgwaittemp, tc_bit_reacheocplease, tc_bit_waitoktmpdisch, tc_bit_chgwaitttemp2, tc_bit_nochgcurr, tc_bit_chgovervolt, tc_bit_chgovercurr };

char *s; int k; int errcount = 0 ;

s = strchr(net_scratchpad, 0); s = stp_rom(s, "Act err:");

//additional info for error-print if (tc_pack_failedcells != 0) { s = stp_i(s, "\rFailCel:", tc_pack_failedcells); errcount++; } // end additional info

for (k = 0; vehicle_thinkcity_fault_txttable[k][0] != 0; k++) { if (vehicle_thinkcity_fault_vartable[k] != 0) { s = stp_i(s, "\r", vehicle_thinkcity_fault_txttable[k]); k++; errcount++; } } s = stp_i(s, "\rTot err: ", errcount);

}

Best regards Håkon

---

OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev