I guess one of my three OVMS modules is broken. It keeps giving me 2x blink for "Can't communicate with modem" followed by a Modem reset and a new boot process. Any advice? Patrick
Patrick, Is it powered by 12V (not by the ICSP 5V pins)? Can you confirm the exact blink codes (for both red and green LEDs)? Regards, Mark. On 14 Apr, 2013, at 8:07 PM, Patrick Kapsch <patrick.kapsch@mac.com> wrote:
I guess one of my three OVMS modules is broken. It keeps giving me 2x blink for "Can't communicate with modem" followed by a Modem reset and a new boot process. Any advice?
Patrick _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Mark, It's connected to the Twizy, so 12V power. Blink codes go like this: (Firmware code first) 10x green 10x green 10x green 10x green 2x green - 2x red together 1x green both LEDs on showing the reset Am 14.04.2013 um 16:01 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
Patrick,
Is it powered by 12V (not by the ICSP 5V pins)?
Can you confirm the exact blink codes (for both red and green LEDs)?
Regards, Mark.
On 14 Apr, 2013, at 8:07 PM, Patrick Kapsch <patrick.kapsch@mac.com> wrote:
I guess one of my three OVMS modules is broken. It keeps giving me 2x blink for "Can't communicate with modem" followed by a Modem reset and a new boot process. Any advice?
Patrick _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Patrick, I'll reply off-list to this to get it repaired/replaced for you. Regards, Mark. On 14 Apr, 2013, at 10:41 PM, Patrick Kapsch wrote:
Mark, It's connected to the Twizy, so 12V power.
Blink codes go like this: (Firmware code first) 10x green 10x green 10x green 10x green 2x green - 2x red together 1x green both LEDs on showing the reset
Am 14.04.2013 um 16:01 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
Patrick,
Is it powered by 12V (not by the ICSP 5V pins)?
Can you confirm the exact blink codes (for both red and green LEDs)?
Regards, Mark.
On 14 Apr, 2013, at 8:07 PM, Patrick Kapsch <patrick.kapsch@mac.com> wrote:
I guess one of my three OVMS modules is broken. It keeps giving me 2x blink for "Can't communicate with modem" followed by a Modem reset and a new boot process. Any advice?
Patrick _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
participants (2)
-
Mark Webb-Johnson -
Patrick Kapsch