Modem - Last Error: User Interrupt
After I upgraded my modem to a SIM7600 (and replaced my SIM card) I hoped the GSM would be running well again. I'm sorry to say that I still have issues. Every few days GSM will disconnect with "Last Error: User Interrupt". When it disconnects this way it won't connect anymore. Not even when I change location. Only after a "module reset" the connection comes back for another few days. The antenna I use is the internal antenna of the car. I had no issues like this last year. Same antenna then. Am I alone with this behauviour? Any ideas? Thanx Chris cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -77 dBm Mode: GSM;Online State: NetLoss Mux: Status up PPP: Not connected Last Error: User Interrupt GPS: Not running module reset cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -79 dBm Mode: LTE;Online State: NetMode Mux: Status up PPP: Connected on channel: #2 GPS: Not running
Funny coincindence: my 5360 modem stopped working a few days ago (constantly in state PoweringOn). I tried rebooting & a different firmware to no avail. Just took the module out of the car, opened it and it ran fine on my workbench and then also back in the car... maybe just some bad contacts that needed some "love" :) Am 14.07.23 um 19:47 schrieb Chris van der Meijden:
After I upgraded my modem to a SIM7600 (and replaced my SIM card) I hoped the GSM would be running well again.
I'm sorry to say that I still have issues. Every few days GSM will disconnect with "Last Error: User Interrupt". When it disconnects this way it won't connect anymore. Not even when I change location. Only after a "module reset" the connection comes back for another few days.
The antenna I use is the internal antenna of the car. I had no issues like this last year. Same antenna then.
Am I alone with this behauviour?
Any ideas?
Thanx
Chris
cellular status
MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -77 dBm Mode: GSM;Online State: NetLoss Mux: Status up PPP: Not connected Last Error: User Interrupt GPS: Not running
module reset
cellular status
MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -79 dBm Mode: LTE;Online State: NetMode Mux: Status up PPP: Connected on channel: #2 GPS: Not running
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
With the constantly PoweringOn state my odyssee started with the 5360 Modem. I recently changed to the 7600 and could not see anything obvious about "neglected" contacts. If this thing has no solution I'll write a script that does a reboot every 24 hours. Nothing we can't handle with a nice workaround ... Am Samstag, dem 15.07.2023 um 14:35 +0200 schrieb sharkcow:
Funny coincindence: my 5360 modem stopped working a few days ago (constantly in state PoweringOn). I tried rebooting & a different firmware to no avail. Just took the module out of the car, opened it and it ran fine on my workbench and then also back in the car... maybe just some bad contacts that needed some "love" :)
Am 14.07.23 um 19:47 schrieb Chris van der Meijden:
After I upgraded my modem to a SIM7600 (and replaced my SIM card) I hoped the GSM would be running well again.
I'm sorry to say that I still have issues. Every few days GSM will disconnect with "Last Error: User Interrupt". When it disconnects this way it won't connect anymore. Not even when I change location. Only after a "module reset" the connection comes back for another few days.
The antenna I use is the internal antenna of the car. I had no issues like this last year. Same antenna then.
Am I alone with this behauviour?
Any ideas?
Thanx
Chris
cellular status
MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -77 dBm Mode: GSM;Online State: NetLoss Mux: Status up PPP: Not connected Last Error: User Interrupt GPS: Not running
module reset
cellular status
MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -79 dBm Mode: LTE;Online State: NetMode Mux: Status up PPP: Connected on channel: #2 GPS: Not running
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
At the moment I have the same problem with at least 3 customers of mine. WLAN doesn't work anymore either. The only solution is powerless and afterwards it works again for some time. I would appreciate to install a watchdog which makes a reset every 24 hours. Regards Pierre Uhl Von: OvmsDev <ovmsdev-bounces@lists.openvehicles.com> Im Auftrag von Chris van der Meijden Gesendet: Samstag, 15. Juli 2023 15:33 An: ovmsdev@lists.openvehicles.com Betreff: Re: [Ovmsdev] Modem - Last Error: User Interrupt With the constantly PoweringOn state my odyssee started with the 5360 Modem. I recently changed to the 7600 and could not see anything obvious about "neglected" contacts. If this thing has no solution I'll write a script that does a reboot every 24 hours. Nothing we can't handle with a nice workaround ... Am Samstag, dem 15.07.2023 um 14:35 +0200 schrieb sharkcow: Funny coincindence: my 5360 modem stopped working a few days ago (constantly in state PoweringOn). I tried rebooting & a different firmware to no avail. Just took the module out of the car, opened it and it ran fine on my workbench and then also back in the car... maybe just some bad contacts that needed some "love" :) Am 14.07.23 um 19:47 schrieb Chris van der Meijden: After I upgraded my modem to a SIM7600 (and replaced my SIM card) I hoped the GSM would be running well again. I'm sorry to say that I still have issues. Every few days GSM will disconnect with "Last Error: User Interrupt". When it disconnects this way it won't connect anymore. Not even when I change location. Only after a "module reset" the connection comes back for another few days. The antenna I use is the internal antenna of the car. I had no issues like this last year. Same antenna then. Am I alone with this behauviour? Any ideas? Thanx Chris cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -77 dBm Mode: GSM;Online State: NetLoss Mux: Status up PPP: Not connected Last Error: User Interrupt GPS: Not running module reset cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -79 dBm Mode: LTE;Online State: NetMode Mux: Status up PPP: Connected on channel: #2 GPS: Not running _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com <mailto:OvmsDev@lists.openvehicles.com> http://lists.openvehicles.com/mailman/listinfo/ovmsdev _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com <mailto:OvmsDev@lists.openvehicles.com> http://lists.openvehicles.com/mailman/listinfo/ovmsdev
Wifi still works for me. I did some lazy search on how to implement a cronjob script within OVMS without success. So my "workaroud" for now is to type a preventive module reset in the "Messages" command line within the app every morning (as long as I'm still connected to my wifi). This is a great example of "Turnschuhadmin" (sneaker admin) ... Feature request: A simple cron implementation for scripting. Or a hint on where to find such a feature within OVMS, if it already exists. Regards Chris Am Freitag, dem 21.07.2023 um 21:23 +0200 schrieb pi.uhl@bluewin.ch:
At the moment I have the same problem with at least 3 customers of mine. WLAN doesn't work anymore either. The only solution is powerless and afterwards it works again for some time. I would appreciate to install a watchdog which makes a reset every 24 hours. Regards Pierre Uhl Von: OvmsDev <ovmsdev-bounces@lists.openvehicles.com> Im Auftrag von Chris van der Meijden Gesendet: Samstag, 15. Juli 2023 15:33 An: ovmsdev@lists.openvehicles.com Betreff: Re: [Ovmsdev] Modem - Last Error: User Interrupt With the constantly PoweringOn state my odyssee started with the 5360 Modem. I recently changed to the 7600 and could not see anything obvious about "neglected" contacts. If this thing has no solution I'll write a script that does a reboot every 24 hours. Nothing we can't handle with a nice workaround ... Am Samstag, dem 15.07.2023 um 14:35 +0200 schrieb sharkcow:
Funny coincindence: my 5360 modem stopped working a few days ago (constantly in state PoweringOn). I tried rebooting & a different firmware to no avail. Just took the module out of the car, opened it and it ran fine on my workbench and then also back in the car... maybe just some bad contacts that needed some "love" :) Am 14.07.23 um 19:47 schrieb Chris van der Meijden:
After I upgraded my modem to a SIM7600 (and replaced my SIM card) I hoped the GSM would be running well again. I'm sorry to say that I still have issues. Every few days GSM will disconnect with "Last Error: User Interrupt". When it disconnects this way it won't connect anymore. Not even when I change location. Only after a "module reset" the connection comes back for another few days. The antenna I use is the internal antenna of the car. I had no issues like this last year. Same antenna then. Am I alone with this behauviour? Any ideas? Thanx Chris cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -77 dBm Mode: GSM;Online State: NetLoss Mux: Status up PPP: Not connected Last Error: User Interrupt GPS: Not running module reset cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -79 dBm Mode: LTE;Online State: NetMode Mux: Status up PPP: Connected on channel: #2 GPS: Not running _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
Chris & Pierre, cron jobs can easily be implemented by attaching event scripts to the standard "clock.*" events. → https://docs.openvehicles.com/en/latest/userguide/events.html For a daily job running at 01:00, all you need is a simple script for "clock.0100". For jobs running at specific time conditions, make the event script a javascript, e.g. along something like this: (function(){ const now = new Date(); const day = now.getDay(); // Sunday - Saturday : 0 - 6 if (day == 3) { print("now performing the wednesday job…"); } })() A plugin providing a simple UI to manage cron jobs should be easy to create. Regards, Michael Am 21.07.23 um 21:53 schrieb Chris van der Meijden:
Wifi still works for me. I did some lazy search on how to implement a cronjob script within OVMS without success. So my "workaroud" for now is to type a preventive
module reset
in the "Messages" command line within the app every morning (as long as I'm still connected to my wifi).
This is a great example of "Turnschuhadmin" (sneaker admin) ...
Feature request: A simple cron implementation for scripting. Or a hint on where to find such a feature within OVMS, if it already exists.
Regards
Chris
Am Freitag, dem 21.07.2023 um 21:23 +0200 schrieb pi.uhl@bluewin.ch:
At the moment I have the same problem with at least 3 customers of mine. WLAN doesn't work anymore either. The only solution is powerless and afterwards it works again for some time. I would appreciate to install a watchdog which makes a reset every 24 hours.
Regards
Pierre Uhl
*Von:*OvmsDev <ovmsdev-bounces@lists.openvehicles.com> *Im Auftrag von *Chris van der Meijden *Gesendet:* Samstag, 15. Juli 2023 15:33 *An:* ovmsdev@lists.openvehicles.com *Betreff:* Re: [Ovmsdev] Modem - Last Error: User Interrupt
With the constantly PoweringOn state my odyssee started with the 5360 Modem.
I recently changed to the 7600 and could not see anything obvious about "neglected" contacts.
If this thing has no solution I'll write a script that does a reboot every 24 hours.
Nothing we can't handle with a nice workaround ...
Am Samstag, dem 15.07.2023 um 14:35 +0200 schrieb sharkcow:
Funny coincindence: my 5360 modem stopped working a few days ago
(constantly in state PoweringOn). I tried rebooting & a different
firmware to no avail. Just took the module out of the car, opened it and
it ran fine on my workbench and then also back in the car... maybe just
some bad contacts that needed some "love" :)
Am 14.07.23 um 19:47 schrieb Chris van der Meijden:
After I upgraded my modem to a SIM7600 (and replaced my SIM card) I
hoped the GSM would be running well again.
I'm sorry to say that I still have issues. Every few days GSM will
disconnect with "Last Error: User Interrupt". When it disconnects this
way it won't connect anymore. Not even when I change location. Only
after a "module reset" the connection comes back for another few days.
The antenna I use is the internal antenna of the car. I had no issues
like this last year. Same antenna then.
Am I alone with this behauviour?
Any ideas?
Thanx
Chris
cellular status
MODEM Status
Model: SIM7600
Network Registration: RegisteredHome
Provider: congstar
Signal: -77 dBm
Mode: GSM;Online
State: NetLoss
Mux: Status up
PPP: Not connected
Last Error: User Interrupt
GPS: Not running
module reset
cellular status
MODEM Status
Model: SIM7600
Network Registration: RegisteredHome
Provider: congstar
Signal: -79 dBm
Mode: LTE;Online
State: NetMode
Mux: Status up
PPP: Connected on channel: #2
GPS: Not running
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
It still would be better to find the actual cause of the modem issue though. Regards, Michael Am 02.08.23 um 20:58 schrieb Michael Balzer:
Chris & Pierre,
cron jobs can easily be implemented by attaching event scripts to the standard "clock.*" events.
→ https://docs.openvehicles.com/en/latest/userguide/events.html
For a daily job running at 01:00, all you need is a simple script for "clock.0100".
For jobs running at specific time conditions, make the event script a javascript, e.g. along something like this:
(function(){ const now = new Date(); const day = now.getDay(); // Sunday - Saturday : 0 - 6 if (day == 3) { print("now performing the wednesday job…"); } })()
A plugin providing a simple UI to manage cron jobs should be easy to create.
Regards, Michael
Am 21.07.23 um 21:53 schrieb Chris van der Meijden:
Wifi still works for me. I did some lazy search on how to implement a cronjob script within OVMS without success. So my "workaroud" for now is to type a preventive
module reset
in the "Messages" command line within the app every morning (as long as I'm still connected to my wifi).
This is a great example of "Turnschuhadmin" (sneaker admin) ...
Feature request: A simple cron implementation for scripting. Or a hint on where to find such a feature within OVMS, if it already exists.
Regards
Chris
Am Freitag, dem 21.07.2023 um 21:23 +0200 schrieb pi.uhl@bluewin.ch:
At the moment I have the same problem with at least 3 customers of mine. WLAN doesn't work anymore either. The only solution is powerless and afterwards it works again for some time. I would appreciate to install a watchdog which makes a reset every 24 hours.
Regards
Pierre Uhl
*Von:*OvmsDev <ovmsdev-bounces@lists.openvehicles.com> *Im Auftrag von *Chris van der Meijden *Gesendet:* Samstag, 15. Juli 2023 15:33 *An:* ovmsdev@lists.openvehicles.com *Betreff:* Re: [Ovmsdev] Modem - Last Error: User Interrupt
With the constantly PoweringOn state my odyssee started with the 5360 Modem.
I recently changed to the 7600 and could not see anything obvious about "neglected" contacts.
If this thing has no solution I'll write a script that does a reboot every 24 hours.
Nothing we can't handle with a nice workaround ...
Am Samstag, dem 15.07.2023 um 14:35 +0200 schrieb sharkcow:
Funny coincindence: my 5360 modem stopped working a few days ago
(constantly in state PoweringOn). I tried rebooting & a different
firmware to no avail. Just took the module out of the car, opened it and
it ran fine on my workbench and then also back in the car... maybe just
some bad contacts that needed some "love" :)
Am 14.07.23 um 19:47 schrieb Chris van der Meijden:
After I upgraded my modem to a SIM7600 (and replaced my SIM card) I
hoped the GSM would be running well again.
I'm sorry to say that I still have issues. Every few days GSM will
disconnect with "Last Error: User Interrupt". When it disconnects this
way it won't connect anymore. Not even when I change location. Only
after a "module reset" the connection comes back for another few days.
The antenna I use is the internal antenna of the car. I had no issues
like this last year. Same antenna then.
Am I alone with this behauviour?
Any ideas?
Thanx
Chris
cellular status
MODEM Status
Model: SIM7600
Network Registration: RegisteredHome
Provider: congstar
Signal: -77 dBm
Mode: GSM;Online
State: NetLoss
Mux: Status up
PPP: Not connected
Last Error: User Interrupt
GPS: Not running
module reset
cellular status
MODEM Status
Model: SIM7600
Network Registration: RegisteredHome
Provider: congstar
Signal: -79 dBm
Mode: LTE;Online
State: NetMode
Mux: Status up
PPP: Connected on channel: #2
GPS: Not running
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
_______________________________________________
OvmsDev mailing list
OvmsDev@lists.openvehicles.com
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
Thanx :-) Am Mittwoch, dem 02.08.2023 um 21:00 +0200 schrieb Michael Balzer:
It still would be better to find the actual cause of the modem issue though.
Regards, Michael
Am 02.08.23 um 20:58 schrieb Michael Balzer: Chris & Pierre,
cron jobs can easily be implemented by attaching event scripts to the standard "clock.*" events.
→ https://docs.openvehicles.com/en/latest/userguide/events.html
For a daily job running at 01:00, all you need is a simple script for "clock.0100".
For jobs running at specific time conditions, make the event script a javascript, e.g. along something like this:
(function(){ const now = new Date(); const day = now.getDay(); // Sunday - Saturday : 0 - 6 if (day == 3) { print("now performing the wednesday job…"); } })()
A plugin providing a simple UI to manage cron jobs should be easy to create.
Regards, Michael
Am 21.07.23 um 21:53 schrieb Chris van der Meijden:
Wifi still works for me. I did some lazy search on how to implement a cronjob script within OVMS without success. So my "workaroud" for now is to type a preventive
module reset
in the "Messages" command line within the app every morning (as long as I'm still connected to my wifi).
This is a great example of "Turnschuhadmin" (sneaker admin) ...
Feature request: A simple cron implementation for scripting. Or a hint on where to find such a feature within OVMS, if it already exists.
Regards
Chris
Am Freitag, dem 21.07.2023 um 21:23 +0200 schrieb pi.uhl@bluewin.ch:
At the moment I have the same problem with at least 3 customers of mine. WLAN doesn't work anymore either. The only solution is powerless and afterwards it works again for some time. I would appreciate to install a watchdog which makes a reset every 24 hours. Regards Pierre Uhl Von: OvmsDev <ovmsdev-bounces@lists.openvehicles.com> Im Auftrag von Chris van der Meijden Gesendet: Samstag, 15. Juli 2023 15:33 An: ovmsdev@lists.openvehicles.com Betreff: Re: [Ovmsdev] Modem - Last Error: User Interrupt With the constantly PoweringOn state my odyssee started with the 5360 Modem. I recently changed to the 7600 and could not see anything obvious about "neglected" contacts. If this thing has no solution I'll write a script that does a reboot every 24 hours. Nothing we can't handle with a nice workaround ... Am Samstag, dem 15.07.2023 um 14:35 +0200 schrieb sharkcow:
Funny coincindence: my 5360 modem stopped working a few days ago (constantly in state PoweringOn). I tried rebooting & a different firmware to no avail. Just took the module out of the car, opened it and it ran fine on my workbench and then also back in the car... maybe just some bad contacts that needed some "love" :) Am 14.07.23 um 19:47 schrieb Chris van der Meijden:
After I upgraded my modem to a SIM7600 (and replaced my SIM card) I hoped the GSM would be running well again. I'm sorry to say that I still have issues. Every few days GSM will disconnect with "Last Error: User Interrupt". When it disconnects this way it won't connect anymore. Not even when I change location. Only after a "module reset" the connection comes back for another few days. The antenna I use is the internal antenna of the car. I had no issues like this last year. Same antenna then. Am I alone with this behauviour? Any ideas? Thanx Chris cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -77 dBm Mode: GSM;Online State: NetLoss Mux: Status up PPP: Not connected Last Error: User Interrupt GPS: Not running module reset cellular status MODEM Status Model: SIM7600 Network Registration: RegisteredHome Provider: congstar Signal: -79 dBm Mode: LTE;Online State: NetMode Mux: Status up PPP: Connected on channel: #2 GPS: Not running _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
participants (4)
-
Chris van der Meijden -
Michael Balzer -
pi.uhl＠bluewin.ch -
sharkcow