Enclosure for OVMS v3

newer
Notifications concept draft

older
Tracking lists

Mark Webb-Johnson

3 Nov 2017 3 Nov '17

10:30 a.m.

Injection moulding samples are in. Clean and simple. And oh so black. Regards, Mark

Attachments:

D4ABB914-F9CE-4039-9826-6D442325A49E.PNG (image/png — 346.0 KB)
9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG (image/png — 307.9 KB)
32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG (image/png — 269.3 KB)
45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG (image/png — 520.9 KB)

Show replies by date

Geir Øyvind Vælidalo

4 Nov 4 Nov

2:44 a.m.

Nice 🙂 How are they held together? Geir

...

3. nov. 2017 kl. 03:30 skrev Mark Webb-Johnson <mark@webb-johnson.net>:

Injection moulding samples are in.

Clean and simple. And oh so black.

Regards, Mark

<D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>

<9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>

<32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>

<45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG> _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

Mark Webb-Johnson

9:06 p.m.

Same as the 3D printed ones. 4 screws in the base. Regards, Mark.

...

On 4 Nov 2017, at 2:44 AM, Geir Øyvind Vælidalo <geir@validalo.net> wrote:

Nice 🙂

How are they held together?

Geir

...
3. nov. 2017 kl. 03:30 skrev Mark Webb-Johnson <mark@webb-johnson.net <mailto:mark@webb-johnson.net>>:

Injection moulding samples are in.

Clean and simple. And oh so black.

Regards, Mark

<D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>

<9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>

<32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>

<45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG> _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

Is it possible to get the stl-file for the enclosure so I can print my own? I’m going to be doing some proper testing in the car in the next weeks and have already managed to break off one of the capacitors. It came of quite easily, though, so it looks like it was a little bit loosely soldered. Luckily it was relatively easy to solder back on 🙂 Best regards, Geir Sendt fra min iPhone

...

4. nov. 2017 kl. 14:06 skrev Mark Webb-Johnson <mark@webb-johnson.net>:

Same as the 3D printed ones. 4 screws in the base.

Regards, Mark.

...
On 4 Nov 2017, at 2:44 AM, Geir Øyvind Vælidalo <geir@validalo.net> wrote:

Nice 🙂

How are they held together?

Geir

...
3. nov. 2017 kl. 03:30 skrev Mark Webb-Johnson <mark@webb-johnson.net>:

Injection moulding samples are in.

Clean and simple. And oh so black.

Regards, Mark

<D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>

<9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>

<32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>

<45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG> _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

Mark Webb-Johnson

4 Dec 4 Dec

9:36 a.m.

I should be able to get this once the injection moulding production run is done. I’ll add it when ready. Regards, Mark.

...

On 3 Dec 2017, at 8:29 AM, Geir Øyvind Vælidalo <geir@validalo.net> wrote:

Is it possible to get the stl-file for the enclosure so I can print my own? I’m going to be doing some proper testing in the car in the next weeks and have already managed to break off one of the capacitors. It came of quite easily, though, so it looks like it was a little bit loosely soldered. Luckily it was relatively easy to solder back on 🙂

Best regards, Geir

Sendt fra min iPhone

4. nov. 2017 kl. 14:06 skrev Mark Webb-Johnson <mark@webb-johnson.net <mailto:mark@webb-johnson.net>>:

...
Same as the 3D printed ones. 4 screws in the base.

Regards, Mark.

...
On 4 Nov 2017, at 2:44 AM, Geir Øyvind Vælidalo <geir@validalo.net <mailto:geir@validalo.net>> wrote:

Nice 🙂

How are they held together?

Geir

...
3. nov. 2017 kl. 03:30 skrev Mark Webb-Johnson <mark@webb-johnson.net <mailto:mark@webb-johnson.net>>:

Injection moulding samples are in.

Clean and simple. And oh so black.

Regards, Mark

<D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>

<9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>

<32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>

<45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG> _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk <mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev <http://lists.teslaclub.hk/mailman/listinfo/ovmsdev>

OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

Frank Demes

4 Nov 4 Nov

2:59 a.m.

Any chance that we get some silicone plugs/caps for the USB/SD slots and the diag port. ;-) I know, it‘s a Twizy problem, but it would help to keep the dust out. Low tech approach with some electric tape is a fallback option, but maybe there is still a window for some add ons ;-) Gruß Frank

...

Am 03.11.2017 um 03:30 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:

Injection moulding samples are in.

Clean and simple. And oh so black.

Regards, Mark

<D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>

<9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>

<32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>

<45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG>

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

Mark Webb-Johnson

9:06 p.m.

I’ll ask. It may be a bit late (as production has already started), but perhaps the guys in china can find something that already exists for this. Regards, Mark.

...

On 4 Nov 2017, at 2:59 AM, Frank Demes <frank.demes@gmx.de> wrote:

Any chance that we get some silicone plugs/caps for the USB/SD slots and the diag port. ;-)

I know, it‘s a Twizy problem, but it would help to keep the dust out.

Low tech approach with some electric tape is a fallback option, but maybe there is still a window for some add ons ;-)

Gruß Frank

...
Am 03.11.2017 um 03:30 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:

Injection moulding samples are in.

Clean and simple. And oh so black.

Regards, Mark

<D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>

<9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>

<32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>

<45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG>

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

3050

Age (days ago)

3081

Last active (days ago)

List overview

Download

6 comments

3 participants

participants (3)

Frank Demes
Geir Øyvind Vælidalo
Mark Webb-Johnson