I have been having issues with my OVMS module not connection. When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often. I received my RS232/USB adaptor so logged the following data, any use? P.S. This is with a Global GeoSIM, in the UK ==== LOG ==== GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1 OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230 +CPIN: READY OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600 OK +COPS: 0,1,"Orange" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"TMO UK" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"Orange" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"TMO UK" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"Orange" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"TMO UK" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"Orange" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"TMO UK" OK SHUT OK OK OK +PDP: DEACT ERROR OK +CSMINS: 0,1 OK 89234185500007905230 +CPIN: READY OK +IPR: 9600 OK +COPS: 0,1,"Orange" OK
What version of the Mitsubishi code are you using? I recommend you to run the latest one on GitHub. I have fixed some bugs, done some optimization. And now the ODO is ok. Regards, Thomas søndag 29. september 2013 skrev Matt Beard følgende:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
Matt, One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)? The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok. Regards, Mark. On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit. Matt, I can recommend O2… if you're having problems with signal in the area. I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock… On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
I use giffgaff (O2 network) and it works like a charm all over the UK. I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy. Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
What's the coverage map in your area like, Matt? Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware. Matt On 30 September 2013 08:10, Nikki Gordon-Bloomfield <nikki@littlecollie.com>wrote:
What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW < kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" < nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK
AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
If no one has any better suggestions then send me the hardware and I'll plug it into my car and test. Kevin On 30 Sep 2013, at 09:03, "Matt Beard OVMS" <smvo@mxf.org.uk<mailto:smvo@mxf.org.uk>> wrote: There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware. Matt On 30 September 2013 08:10, Nikki Gordon-Bloomfield <nikki@littlecollie.com<mailto:nikki@littlecollie.com>> wrote: What's the coverage map in your area like, Matt? Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org<mailto:kevin.sharpe@zerocarbonworld.org>> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com<mailto:nikki@aminorjourney.com>> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net<mailto:mark@webb-johnson.net>> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv<mailto:matt@beard.tv>> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk<mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk<mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk<mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk<mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk<mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk<mailto:OvmsDev@lists.teslaclub.hk> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Thanks for the offer Kevin. There are still a couple of things I want to try before I get to that point - next step is to get hold of a Vodafone SIM as that is the only other network with coverage here. Matt On 30 September 2013 09:10, Kevin Sharpe ZCW < kevin.sharpe@zerocarbonworld.org> wrote:
If no one has any better suggestions then send me the hardware and I'll plug it into my car and test.
Kevin
On 30 Sep 2013, at 09:03, "Matt Beard OVMS" <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield < nikki@littlecollie.com> wrote:
What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW < kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" < nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK
AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Matt, Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange. As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that: For instructions on getting into SETUP DIAG mode: http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU... Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich. Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output: Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1 Search cellular signal: AT+COPS=0,1;+COPS? APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867" DISCONNECT: AT+CIPSHUT STATUS: AT+CREG?;+CIPSTATUS;+CSQ The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection. Please save a transcript, and send to me. From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing. Regards, Mark. On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield <nikki@littlecollie.com> wrote: What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal? Matt On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield < nikki@littlecollie.com> wrote:
What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW < kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" < nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK
AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Matt, It can sometimes be tricky, depending on power. Are you doing this on the bench with +12V or in the car? When you plug in, does the blue modem led start flashing? If not, try unplugging and plugging in again? If still not, try the little reset button on the board. You need the modem to be flashing blue led for a few seconds, then it will start responding to your typing. You may have to type ATE1 to enable echo. Local echo is no use - you need echo from the modem. You have about 15-to-20 seconds to type SETUP after plugging in - all through the version blinking and the subsequent ten second delay. Once the PIC starts talking to the modem, it is too late. Regards, Mark. On 30 Sep, 2013, at 4:50 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal?
Matt
On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield <nikki@littlecollie.com> wrote: What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote:
I have been having issues with my OVMS module not connection.
When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often.
I received my RS232/USB adaptor so logged the following data, any use?
P.S. This is with a Global GeoSIM, in the UK
==== LOG ====
GPS Ready ATREG: 5 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1
OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230
+CPIN: READY
OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 +IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"TMO UK"
OK
SHUT OK
OK
OK
+PDP: DEACT
ERROR
OK
+CSMINS: 0,1
OK
89234185500007905230
+CPIN: READY
OK
+IPR: 9600
OK
+COPS: 0,1,"Orange"
OK
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
I am trying this test in the car - and I have the OVMS in its case for protection so can't easily see the blue LED. Your instructions for getting into setup mode don't say what baud rate or other params to set, I used trial and error to discover 9600,8,N,1 will give the debug output - I assume this is right. Matt On 30 September 2013 09:54, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
It can sometimes be tricky, depending on power. Are you doing this on the bench with +12V or in the car?
When you plug in, does the blue modem led start flashing? If not, try unplugging and plugging in again? If still not, try the little reset button on the board.
You need the modem to be flashing blue led for a few seconds, then it will start responding to your typing. You may have to type ATE1 to enable echo. Local echo is no use - you need echo from the modem.
You have about 15-to-20 seconds to type SETUP after plugging in - all through the version blinking and the subsequent ten second delay. Once the PIC starts talking to the modem, it is too late.
Regards, Mark.
On 30 Sep, 2013, at 4:50 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal?
Matt
On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net>wrote:
Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield < nikki@littlecollie.com> wrote:
What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW < kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" < nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
> On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote: > > I have been having issues with my OVMS module not connection. > > When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often. > > I received my RS232/USB adaptor so logged the following data, any use? > > P.S. This is with a Global GeoSIM, in the UK > > > ==== LOG ==== > > GPS Ready > ATREG: 5 > OK > AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? > +CSMINS: 0,1 > > OK > AT+CCID;+CPBF="O-";+CPIN? > 89234185500007905230 > > +CPIN: READY > > OK > AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > _______________________________________________ > OvmsDev mailing list > OvmsDev@lists.teslaclub.hk > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Matt, Yes, 9600,8,n,1 is correct. Regards, Mark. On 30 Sep, 2013, at 4:59 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I am trying this test in the car - and I have the OVMS in its case for protection so can't easily see the blue LED.
Your instructions for getting into setup mode don't say what baud rate or other params to set, I used trial and error to discover 9600,8,N,1 will give the debug output - I assume this is right.
Matt
On 30 September 2013 09:54, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
It can sometimes be tricky, depending on power. Are you doing this on the bench with +12V or in the car?
When you plug in, does the blue modem led start flashing? If not, try unplugging and plugging in again? If still not, try the little reset button on the board.
You need the modem to be flashing blue led for a few seconds, then it will start responding to your typing. You may have to type ATE1 to enable echo. Local echo is no use - you need echo from the modem.
You have about 15-to-20 seconds to type SETUP after plugging in - all through the version blinking and the subsequent ten second delay. Once the PIC starts talking to the modem, it is too late.
Regards, Mark.
On 30 Sep, 2013, at 4:50 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal?
Matt
On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield <nikki@littlecollie.com> wrote: What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)?
The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok.
Regards, Mark.
> On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote: > > I have been having issues with my OVMS module not connection. > > When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often. > > I received my RS232/USB adaptor so logged the following data, any use? > > P.S. This is with a Global GeoSIM, in the UK > > > ==== LOG ==== > > GPS Ready > ATREG: 5 > OK > AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? > +CSMINS: 0,1 > > OK > AT+CCID;+CPBF="O-";+CPIN? > 89234185500007905230 > > +CPIN: READY > > OK > AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"TMO UK" > > OK > > SHUT OK > > OK > > OK > > +PDP: DEACT > > ERROR > > OK > > +CSMINS: 0,1 > > OK > > 89234185500007905230 > > +CPIN: READY > > OK > > +IPR: 9600 > > OK > > +COPS: 0,1,"Orange" > > OK > > _______________________________________________ > OvmsDev mailing list > OvmsDev@lists.teslaclub.hk > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
I managed to get into setup mode! For some reason it only seemed to accept the setup command in a very tiny time window. I just kept typing "SETUP<CR>" all through the boot and after about 10 seconds it suddenly echoed what I was typing and took the command to go into setup mode. Now I am there I can't see much more than before. I can see that the signal strength is "10" and I am currently on "Orange". The switch is read as being "1", but the GPRS is simply "not connected (0x007f)" Matt On 30 September 2013 10:02, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Matt,
Yes, 9600,8,n,1 is correct.
Regards, Mark.
On 30 Sep, 2013, at 4:59 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I am trying this test in the car - and I have the OVMS in its case for protection so can't easily see the blue LED.
Your instructions for getting into setup mode don't say what baud rate or other params to set, I used trial and error to discover 9600,8,N,1 will give the debug output - I assume this is right.
Matt
On 30 September 2013 09:54, Mark Webb-Johnson <mark@webb-johnson.net>wrote:
Matt,
It can sometimes be tricky, depending on power. Are you doing this on the bench with +12V or in the car?
When you plug in, does the blue modem led start flashing? If not, try unplugging and plugging in again? If still not, try the little reset button on the board.
You need the modem to be flashing blue led for a few seconds, then it will start responding to your typing. You may have to type ATE1 to enable echo. Local echo is no use - you need echo from the modem.
You have about 15-to-20 seconds to type SETUP after plugging in - all through the version blinking and the subsequent ten second delay. Once the PIC starts talking to the modem, it is too late.
Regards, Mark.
On 30 Sep, 2013, at 4:50 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal?
Matt
On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net>wrote:
Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield < nikki@littlecollie.com> wrote:
What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW < kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" < nikki@aminorjourney.com> wrote:
If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit.
Matt, I can recommend O2… if you're having problems with signal in the area.
I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock…
> On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote: > > Matt, > > One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)? > > The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok. > > Regards, Mark. > >> On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote: >> >> I have been having issues with my OVMS module not connection. >> >> When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often. >> >> I received my RS232/USB adaptor so logged the following data, any use? >> >> P.S. This is with a Global GeoSIM, in the UK >> >> >> ==== LOG ==== >> >> GPS Ready >> ATREG: 5 >> OK >> AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? >> +CSMINS: 0,1 >> >> OK >> AT+CCID;+CPBF="O-";+CPIN? >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"Orange" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"TMO UK" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"Orange" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"TMO UK" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"Orange" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"TMO UK" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"Orange" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"TMO UK" >> >> OK >> >> SHUT OK >> >> OK >> >> OK >> >> +PDP: DEACT >> >> ERROR >> >> OK >> >> +CSMINS: 0,1 >> >> OK >> >> 89234185500007905230 >> >> +CPIN: READY >> >> OK >> >> +IPR: 9600 >> >> OK >> >> +COPS: 0,1,"Orange" >> >> OK >> >> _______________________________________________ >> OvmsDev mailing list >> OvmsDev@lists.teslaclub.hk >> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev > > _______________________________________________ > OvmsDev mailing list > OvmsDev@lists.teslaclub.hk > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Ok. Now you can talk to the modem. Can you ATE1 then go through the command I gave in the earlier eMail? Regards, Mark.
On 30 Sep, 2013, at 5:22 pm, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I managed to get into setup mode!
For some reason it only seemed to accept the setup command in a very tiny time window. I just kept typing "SETUP<CR>" all through the boot and after about 10 seconds it suddenly echoed what I was typing and took the command to go into setup mode.
Now I am there I can't see much more than before. I can see that the signal strength is "10" and I am currently on "Orange". The switch is read as being "1", but the GPRS is simply "not connected (0x007f)"
Matt
On 30 September 2013 10:02, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
Yes, 9600,8,n,1 is correct.
Regards, Mark.
On 30 Sep, 2013, at 4:59 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I am trying this test in the car - and I have the OVMS in its case for protection so can't easily see the blue LED.
Your instructions for getting into setup mode don't say what baud rate or other params to set, I used trial and error to discover 9600,8,N,1 will give the debug output - I assume this is right.
Matt
On 30 September 2013 09:54, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
It can sometimes be tricky, depending on power. Are you doing this on the bench with +12V or in the car?
When you plug in, does the blue modem led start flashing? If not, try unplugging and plugging in again? If still not, try the little reset button on the board.
You need the modem to be flashing blue led for a few seconds, then it will start responding to your typing. You may have to type ATE1 to enable echo. Local echo is no use - you need echo from the modem.
You have about 15-to-20 seconds to type SETUP after plugging in - all through the version blinking and the subsequent ten second delay. Once the PIC starts talking to the modem, it is too late.
Regards, Mark.
On 30 Sep, 2013, at 4:50 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal?
Matt
On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
> On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote: > > There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware. > > Matt > > > >> On 30 September 2013 08:10, Nikki Gordon-Bloomfield <nikki@littlecollie.com> wrote: >> What's the coverage map in your area like, Matt? >> >> Sent from my iPhone >> >> > On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org> wrote: >> > >> > I use giffgaff (O2 network) and it works like a charm all over the UK. >> > >> > I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy. >> > >> > Kevin >> > >> >> On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com> wrote: >> >> >> >> If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit. >> >> >> >> Matt, I can recommend O2… if you're having problems with signal in the area. >> >> >> >> I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock… >> >> >> >> >> >>> On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote: >> >>> >> >>> Matt, >> >>> >> >>> One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)? >> >>> >> >>> The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok. >> >>> >> >>> Regards, Mark. >> >>> >> >>>> On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote: >> >>>> >> >>>> I have been having issues with my OVMS module not connection. >> >>>> >> >>>> When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often. >> >>>> >> >>>> I received my RS232/USB adaptor so logged the following data, any use? >> >>>> >> >>>> P.S. This is with a Global GeoSIM, in the UK >> >>>> >> >>>> >> >>>> ==== LOG ==== >> >>>> >> >>>> GPS Ready >> >>>> ATREG: 5 >> >>>> OK >> >>>> AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> AT+CCID;+CPBF="O-";+CPIN? >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"Orange" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"TMO UK" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"Orange" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"TMO UK" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"Orange" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"TMO UK" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"Orange" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"TMO UK" >> >>>> >> >>>> OK >> >>>> >> >>>> SHUT OK >> >>>> >> >>>> OK >> >>>> >> >>>> OK >> >>>> >> >>>> +PDP: DEACT >> >>>> >> >>>> ERROR >> >>>> >> >>>> OK >> >>>> >> >>>> +CSMINS: 0,1 >> >>>> >> >>>> OK >> >>>> >> >>>> 89234185500007905230 >> >>>> >> >>>> +CPIN: READY >> >>>> >> >>>> OK >> >>>> >> >>>> +IPR: 9600 >> >>>> >> >>>> OK >> >>>> >> >>>> +COPS: 0,1,"Orange" >> >>>> >> >>>> OK >> >>>> >> >>>> _______________________________________________ >> >>>> OvmsDev mailing list >> >>>> OvmsDev@lists.teslaclub.hk >> >>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev >> >>> >> >>> _______________________________________________ >> >>> OvmsDev mailing list >> >>> OvmsDev@lists.teslaclub.hk >> >>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev >> >> >> >> _______________________________________________ >> >> OvmsDev mailing list >> >> OvmsDev@lists.teslaclub.hk >> >> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev >> > _______________________________________________ >> > OvmsDev mailing list >> > OvmsDev@lists.teslaclub.hk >> > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev >> _______________________________________________ >> OvmsDev mailing list >> OvmsDev@lists.teslaclub.hk >> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev > > _______________________________________________ > OvmsDev mailing list > OvmsDev@lists.teslaclub.hk > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OK, well that was interesting! I have pasted the log below, but my interpretation is that the TCP connection was closed for no apparent reason just after the first status query. Is that normal? Matt ==== Log ==== ATE1 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1 OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230 +CPIN: READY OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1 +IPR: 9600 OK AT+COPS=0,1;+COPS? +COPS: 0,1,"TMO UK" OK AT+CGDCONT=1,"IP","MOBILEDATA" OK AT+CSTT="MOBILEDATA","","" OK AT+CIICR OK AT+CIPHEAD=1 OK AT+CIFSR 172.17.164.59 AT+CLPORT="TCP","6867" OK AT+CIPSTART="TCP","64.111.70.40","6867" OK CONNECT OK AT+CREG?;+CIPSTATUS;+CSQ +CREG: 1,5 OK STATE: CONNECT OK +CSQ: 21,0 OK CLOSED AT+CREG?;+CIPSTATUS;+CSQ +CREG: 1,5 OK STATE: TCP CLOSED +CSQ: 21,0 OK AT+CIPSHUT SHUT OK On 30 September 2013 11:08, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Ok. Now you can talk to the modem.
Can you ATE1 then go through the command I gave in the earlier eMail?
Regards, Mark.
On 30 Sep, 2013, at 5:22 pm, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I managed to get into setup mode!
For some reason it only seemed to accept the setup command in a very tiny time window. I just kept typing "SETUP<CR>" all through the boot and after about 10 seconds it suddenly echoed what I was typing and took the command to go into setup mode.
Now I am there I can't see much more than before. I can see that the signal strength is "10" and I am currently on "Orange". The switch is read as being "1", but the GPRS is simply "not connected (0x007f)"
Matt
On 30 September 2013 10:02, Mark Webb-Johnson <mark@webb-johnson.net>wrote:
Matt,
Yes, 9600,8,n,1 is correct.
Regards, Mark.
On 30 Sep, 2013, at 4:59 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I am trying this test in the car - and I have the OVMS in its case for protection so can't easily see the blue LED.
Your instructions for getting into setup mode don't say what baud rate or other params to set, I used trial and error to discover 9600,8,N,1 will give the debug output - I assume this is right.
Matt
On 30 September 2013 09:54, Mark Webb-Johnson <mark@webb-johnson.net>wrote:
Matt,
It can sometimes be tricky, depending on power. Are you doing this on the bench with +12V or in the car?
When you plug in, does the blue modem led start flashing? If not, try unplugging and plugging in again? If still not, try the little reset button on the board.
You need the modem to be flashing blue led for a few seconds, then it will start responding to your typing. You may have to type ATE1 to enable echo. Local echo is no use - you need echo from the modem.
You have about 15-to-20 seconds to type SETUP after plugging in - all through the version blinking and the subsequent ten second delay. Once the PIC starts talking to the modem, it is too late.
Regards, Mark.
On 30 Sep, 2013, at 4:50 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal?
Matt
On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net>wrote:
Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield < nikki@littlecollie.com> wrote:
What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW < kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
> On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" < nikki@aminorjourney.com> wrote: > > If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit. > > Matt, I can recommend O2… if you're having problems with signal in the area. > > I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock… > > >> On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote: >> >> Matt, >> >> One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)? >> >> The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok. >> >> Regards, Mark. >> >>> On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote: >>> >>> I have been having issues with my OVMS module not connection. >>> >>> When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often. >>> >>> I received my RS232/USB adaptor so logged the following data, any use? >>> >>> P.S. This is with a Global GeoSIM, in the UK >>> >>> >>> ==== LOG ==== >>> >>> GPS Ready >>> ATREG: 5 >>> OK >>> AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? >>> +CSMINS: 0,1 >>> >>> OK >>> AT+CCID;+CPBF="O-";+CPIN? >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> _______________________________________________ >>> OvmsDev mailing list >>> OvmsDev@lists.teslaclub.hk >>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev >> >> _______________________________________________ >> OvmsDev mailing list >> OvmsDev@lists.teslaclub.hk >> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev > > _______________________________________________ > OvmsDev mailing list > OvmsDev@lists.teslaclub.hk > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Matt, It looks pretty clean. Do you know the time between the "AT+CIPSTART" "CONNECT OK" and the "CLOSED"? There is a 30 second timeout (at the server side) for login, so if you get this around 30 seconds that is expected and normal. The other thing I can suggest is to change net.c NET_INIT3 to the version ending with "E1" (you will see the first line is E0, and then the commented-out line is E1). Then, get a log of the port while the module is trying to initialise. That way you can see the commands and responses. Maybe it is a timing issue... Regards, Mark. On 30 Sep, 2013, at 6:28 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
OK, well that was interesting!
I have pasted the log below, but my interpretation is that the TCP connection was closed for no apparent reason just after the first status query. Is that normal?
Matt
==== Log ====
ATE1 OK AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? +CSMINS: 0,1 OK AT+CCID;+CPBF="O-";+CPIN? 89234185500007905230 +CPIN: READY OK AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1 +IPR: 9600 OK AT+COPS=0,1;+COPS? +COPS: 0,1,"TMO UK" OK AT+CGDCONT=1,"IP","MOBILEDATA" OK AT+CSTT="MOBILEDATA","","" OK AT+CIICR OK AT+CIPHEAD=1 OK AT+CIFSR 172.17.164.59 AT+CLPORT="TCP","6867" OK AT+CIPSTART="TCP","64.111.70.40","6867" OK CONNECT OK AT+CREG?;+CIPSTATUS;+CSQ +CREG: 1,5 OK STATE: CONNECT OK +CSQ: 21,0 OK CLOSED AT+CREG?;+CIPSTATUS;+CSQ +CREG: 1,5 OK STATE: TCP CLOSED +CSQ: 21,0 OK AT+CIPSHUT SHUT OK
On 30 September 2013 11:08, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Ok. Now you can talk to the modem.
Can you ATE1 then go through the command I gave in the earlier eMail?
Regards, Mark.
On 30 Sep, 2013, at 5:22 pm, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I managed to get into setup mode!
For some reason it only seemed to accept the setup command in a very tiny time window. I just kept typing "SETUP<CR>" all through the boot and after about 10 seconds it suddenly echoed what I was typing and took the command to go into setup mode.
Now I am there I can't see much more than before. I can see that the signal strength is "10" and I am currently on "Orange". The switch is read as being "1", but the GPRS is simply "not connected (0x007f)"
Matt
On 30 September 2013 10:02, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
Yes, 9600,8,n,1 is correct.
Regards, Mark.
On 30 Sep, 2013, at 4:59 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
I am trying this test in the car - and I have the OVMS in its case for protection so can't easily see the blue LED.
Your instructions for getting into setup mode don't say what baud rate or other params to set, I used trial and error to discover 9600,8,N,1 will give the debug output - I assume this is right.
Matt
On 30 September 2013 09:54, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
It can sometimes be tricky, depending on power. Are you doing this on the bench with +12V or in the car?
When you plug in, does the blue modem led start flashing? If not, try unplugging and plugging in again? If still not, try the little reset button on the board.
You need the modem to be flashing blue led for a few seconds, then it will start responding to your typing. You may have to type ATE1 to enable echo. Local echo is no use - you need echo from the modem.
You have about 15-to-20 seconds to type SETUP after plugging in - all through the version blinking and the subsequent ten second delay. Once the PIC starts talking to the modem, it is too late.
Regards, Mark.
On 30 Sep, 2013, at 4:50 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
For some reason although I can get debug out of the diag port, it does not allow me to enter setup mode. I have tried typing "SETUP" (in caps and not) a lot of times at various points through the boot, but no response. I have tried following this with CR and CR+LF. It does not echo what I type (though I can set a local echo) is that normal?
Matt
On 30 September 2013 09:16, Mark Webb-Johnson <mark@webb-johnson.net> wrote: Matt,
Looking at the pricing differences, and to rule it out as a problem, I really suggest you try to gsmlock to Orange.
As you have your RS232 working, which is really helpful for this, you could also try to connect manually, to see what detailed errors are returned. Here are the steps for that:
For instructions on getting into SETUP DIAG mode:
http://www.youtube.com/watch?v=-24PoWtHVzk&feature=share&list=UU82Pr9NJBI4PU...
Once there can you try the DIAG command? It will show you the status of the GSM/GPRS switch on the motherboard. Please try to move the switch and make sure the DIAG command output correctly shows the state of the swtich.
Assuming the switch is ok, when in DIAG mode, here are the commands the module sends to the modem. You can copy-and-paste these in, and see the output:
Init #1: AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? Init #2: AT+CCID;+CPBF="O-";+CPIN? Init #3: AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E1
Search cellular signal: AT+COPS=0,1;+COPS?
APN: AT+CGDCONT=1,"IP","APN" (replace APN with APN) CSTT: AT+CSTT="APN","USER","PASS" (replace APN, USER, PASS with GPRS APN, username and password) CIICR: AT+CIICR CIPHEAD: AT+CIPHEAD=1 CIFSR: AT+CIFSR PORT: AT+CLPORT="TCP","6867" CONNECT: AT+CIPSTART="TCP","64.111.70.40","6867"
DISCONNECT: AT+CIPSHUT
STATUS: AT+CREG?;+CIPSTATUS;+CSQ
The result of each stage must be successful before you can continue to the next stage. The end result, if all is ok, should be a connection to the OVMS server. The STATUS command can be used to enquire on the connection status, and DISCONNECT can be used to shutdown the gprs connection.
Please save a transcript, and send to me.
From your previous transcript, the problem appears to be somewhere around the CIICR command. That is around where GPRS is established, and the PDP:DEACT would indicate the GPRS is failing.
Regards, Mark.
On 30 Sep, 2013, at 4:03 PM, Matt Beard OVMS <smvo@mxf.org.uk> wrote:
There is a historical oddity in the UK as T-Mobile (TMO UK) and Orange used to be two separate networks, but are now the same company. Both physical networks work at times, but both also fail at times. This is true in a wide area (I have tried as far south as Perth which is about 100 miles away) so it can't be an issue with the local cell tower. There is no O2 coverage in my area of the country (despite what their coverage map claims). I think I may need to return the hardware.
Matt
On 30 September 2013 08:10, Nikki Gordon-Bloomfield <nikki@littlecollie.com> wrote: What's the coverage map in your area like, Matt?
Sent from my iPhone
On 30 Sep 2013, at 08:06, Kevin Sharpe ZCW <kevin.sharpe@zerocarbonworld.org> wrote:
I use giffgaff (O2 network) and it works like a charm all over the UK.
I couldn't get GEO-sim to work although I gave up quickly because giffgaff was easy.
Kevin
> On 30 Sep 2013, at 07:34, "Nikki Gordon-Bloomfield" <nikki@aminorjourney.com> wrote: > > If the carrier was the problem, it would be concurrent with the problems I had when I tried to put a non-compatible SIM in the unit. > > Matt, I can recommend O2… if you're having problems with signal in the area. > > I would suggest you run it on the bench for a dummy test in generic mode? See if it connects then -- as Mark says, with GSM Lock… > > >> On 30 Sep 2013, at 07:24, Mark Webb-Johnson <mark@webb-johnson.net> wrote: >> >> Matt, >> >> One thing glaring is the flapping between Orange and TMO. Can you try to GSMLock to just one (preferred) provider (using PARAM_GSMLOCK, #13)? >> >> The log itself shows "PDP: DEACT" - which means it can't establish GPRS. The COPS gets through ok, so it managed to connect to GSM ok - which would seem to indicate the antenna and basic network reception was ok. >> >> Regards, Mark. >> >>> On 30 Sep, 2013, at 3:54 AM, Matt Beard <matt@beard.tv> wrote: >>> >>> I have been having issues with my OVMS module not connection. >>> >>> When it does connect I tend to find it has very good signal strength, but it often will not connect when I power it on and I find that it drops off quite often. >>> >>> I received my RS232/USB adaptor so logged the following data, any use? >>> >>> P.S. This is with a Global GeoSIM, in the UK >>> >>> >>> ==== LOG ==== >>> >>> GPS Ready >>> ATREG: 5 >>> OK >>> AT+CGPSPWR=1;+CGPSRST=0;+CSMINS? >>> +CSMINS: 0,1 >>> >>> OK >>> AT+CCID;+CPBF="O-";+CPIN? >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> AT+IPR?;+CREG=1;+CLIP=1;+CMGF=1;+CNMI=2,2;+CSDH=1;+CIPSPRT=0;+CIPQSEND=1;E0 >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"TMO UK" >>> >>> OK >>> >>> SHUT OK >>> >>> OK >>> >>> OK >>> >>> +PDP: DEACT >>> >>> ERROR >>> >>> OK >>> >>> +CSMINS: 0,1 >>> >>> OK >>> >>> 89234185500007905230 >>> >>> +CPIN: READY >>> >>> OK >>> >>> +IPR: 9600 >>> >>> OK >>> >>> +COPS: 0,1,"Orange" >>> >>> OK >>> >>> _______________________________________________ >>> OvmsDev mailing list >>> OvmsDev@lists.teslaclub.hk >>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev >> >> _______________________________________________ >> OvmsDev mailing list >> OvmsDev@lists.teslaclub.hk >> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev > > _______________________________________________ > OvmsDev mailing list > OvmsDev@lists.teslaclub.hk > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
participants (7)
-
Kevin Sharpe ZCW -
Mark Webb-Johnson -
Matt Beard -
Matt Beard OVMS -
Nikki Gordon-Bloomfield -
Nikki Gordon-Bloomfield -
Thomas Bergo