Possible Manufactoring fault last Batch
Hi Jérôme, could you check your OVMS for some missing soldering on the CAN chip? Gruß Frank
Am 06.12.2015 um 23:35 schrieb Jérôme Nicolle <jerome@ceriz.fr>:
Le 06/12/2015 23:19, Michael Balzer a écrit :
you need to switch on the Twizy to read registers.
Just tried aboard my twizy, in INIT an ON state, couldn't get any reading.
-- Jérôme Nicolle 06 19 31 27 14 _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
The stencil seems to be defect so Vdd is missing some paste. Gruß Frank
Am 21.12.2015 um 00:23 schrieb Frank Demes <frank.demes@gmx.de>:
Hi Jérôme,
could you check your OVMS for some missing soldering on the CAN chip?
Gruß Frank
Am 06.12.2015 um 23:35 schrieb Jérôme Nicolle <jerome@ceriz.fr>:
Le 06/12/2015 23:19, Michael Balzer a écrit :
you need to switch on the Twizy to read registers.
Just tried aboard my twizy, in INIT an ON state, couldn't get any reading.
-- Jérôme Nicolle 06 19 31 27 14 _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
I’m travelling at the moment, but more than 100 of that batch have already been shipped and I haven’t heard of this elsewhere. Maybe just that one module? Or have you seen it on others as well? Regards, Mark.
On 21 Dec 2015, at 7:28 AM, Frank Demes <frank.demes@gmx.de> wrote:
<image1.PNG>
The stencil seems to be defect so Vdd is missing some paste.
Gruß Frank
Am 21.12.2015 um 00:23 schrieb Frank Demes <frank.demes@gmx.de>:
Hi Jérôme,
could you check your OVMS for some missing soldering on the CAN chip?
Gruß Frank
Am 06.12.2015 um 23:35 schrieb Jérôme Nicolle <jerome@ceriz.fr>:
Le 06/12/2015 23:19, Michael Balzer a écrit :
you need to switch on the Twizy to read registers.
Just tried aboard my twizy, in INIT an ON state, couldn't get any reading.
-- Jérôme Nicolle 06 19 31 27 14 _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Hi Mark, the module worked „fine" at first. But I got intermittent failures to write some parameters to the Sevcon. That was in the Summer. Now with temperatures dropping the module stopped working altogether. A buddy of mine got his spare OVMS the same as I did. Also I ordered a OVMS last week for another friend of mine. I will check both and get back to you on this. Regards Frank
Am 21.12.2015 um 09:11 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
I’m travelling at the moment, but more than 100 of that batch have already been shipped and I haven’t heard of this elsewhere. Maybe just that one module? Or have you seen it on others as well?
Regards, Mark.
On 21 Dec 2015, at 7:28 AM, Frank Demes <frank.demes@gmx.de> wrote:
<image1.PNG>
The stencil seems to be defect so Vdd is missing some paste.
Gruß Frank
Am 21.12.2015 um 00:23 schrieb Frank Demes <frank.demes@gmx.de>:
Hi Jérôme,
could you check your OVMS for some missing soldering on the CAN chip?
Gruß Frank
Am 06.12.2015 um 23:35 schrieb Jérôme Nicolle <jerome@ceriz.fr>:
Le 06/12/2015 23:19, Michael Balzer a écrit :
you need to switch on the Twizy to read registers.
Just tried aboard my twizy, in INIT an ON state, couldn't get any reading.
-- Jérôme Nicolle 06 19 31 27 14 _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Hi Mark. The third module arrived today. Besides some poor soldering on the GPRS Switch everything else looked fine. My buddys module was also ok. What about your module Jeromé? Could you figure out why you had problems reading on the CAN-Bus? Regards Frank
Am 21.12.2015 um 09:46 schrieb Frank Demes <frank.demes@gmx.de>:
Hi Mark,
the module worked „fine" at first. But I got intermittent failures to write some parameters to the Sevcon.
That was in the Summer. Now with temperatures dropping the module stopped working altogether.
A buddy of mine got his spare OVMS the same as I did. Also I ordered a OVMS last week for another friend of mine. I will check both and get back to you on this.
Regards Frank
Am 21.12.2015 um 09:11 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
I’m travelling at the moment, but more than 100 of that batch have already been shipped and I haven’t heard of this elsewhere. Maybe just that one module? Or have you seen it on others as well?
Regards, Mark.
On 21 Dec 2015, at 7:28 AM, Frank Demes <frank.demes@gmx.de> wrote:
<image1.PNG>
The stencil seems to be defect so Vdd is missing some paste.
Gruß Frank
Am 21.12.2015 um 00:23 schrieb Frank Demes <frank.demes@gmx.de>:
Hi Jérôme,
could you check your OVMS for some missing soldering on the CAN chip?
Gruß Frank
Am 06.12.2015 um 23:35 schrieb Jérôme Nicolle <jerome@ceriz.fr>:
Le 06/12/2015 23:19, Michael Balzer a écrit :
you need to switch on the Twizy to read registers.
Just tried aboard my twizy, in INIT an ON state, couldn't get any reading.
-- Jérôme Nicolle 06 19 31 27 14 _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Hei, I suspect that there may be a problem with the module that I got. It's not able to get anything from the CAN of my C-Zero, I have tried 2.6.2, 2.6.5 and 2.8.1. But it's the same problem. I get "just parked", but the park-counter is not counting up.. Other bugs in Vechle Info on app: * Jibrish "Type" if type MI is chosen (XX works fine) * No VIN * Server version shows vehicle versjon number (Works fine if type=XX) I have looked trough the code, and I suspect that it would behave that way if no can messages were retrieved. On Fri, Jan 8, 2016 at 9:20 PM, Frank Demes <frank.demes@gmx.de> wrote:
Hi Mark.
The third module arrived today. Besides some poor soldering on the GPRS Switch everything else looked fine.
My buddys module was also ok.
What about your module Jeromé? Could you figure out why you had problems reading on the CAN-Bus?
Regards Frank
Am 21.12.2015 um 09:46 schrieb Frank Demes <frank.demes@gmx.de>:
Hi Mark,
the module worked „fine" at first. But I got intermittent failures to write some parameters to the Sevcon.
That was in the Summer. Now with temperatures dropping the module stopped working altogether.
A buddy of mine got his spare OVMS the same as I did. Also I ordered a OVMS last week for another friend of mine. I will check both and get back to you on this.
Regards Frank
Am 21.12.2015 um 09:11 schrieb Mark Webb-Johnson <mark@webb-johnson.net :
I’m travelling at the moment, but more than 100 of that batch have already been shipped and I haven’t heard of this elsewhere. Maybe just that one module? Or have you seen it on others as well?
Regards, Mark.
On 21 Dec 2015, at 7:28 AM, Frank Demes <frank.demes@gmx.de> wrote:
<image1.PNG>
The stencil seems to be defect so Vdd is missing some paste.
Gruß Frank
Am 21.12.2015 um 00:23 schrieb Frank Demes <frank.demes@gmx.de>:
Hi Jérôme,
could you check your OVMS for some missing soldering on the CAN chip?
Gruß Frank
Am 06.12.2015 um 23:35 schrieb Jérôme Nicolle <jerome@ceriz.fr>:
Le 06/12/2015 23:19, Michael Balzer a écrit : > you need to switch on the Twizy to read > registers.
Just tried aboard my twizy, in INIT an ON state, couldn't get any reading.
-- Jérôme Nicolle 06 19 31 27 14 _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Hello Franck, Le 21/12/2015 00:23, Frank Demes a écrit :
could you check your OVMS for some missing soldering on the CAN chip?
My module is from a previous batch, I got it a year ago. Will update it this afternoon, and check for the soldering at this time. Thanks for the hint ! Best regards, -- Jérôme Nicolle
participants (4)
-
Frank Demes -
Jérôme Nicolle -
Mark Webb-Johnson -
Michael Eric Menk