HI folks, Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com) Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc? We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project. Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)? I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces. Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts? Nikki.
Nikki, That would be really wonderful to do, and with your setup relatively easy. Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January. Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there. Regards, Mark. On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc?
We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces.
Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Hi Mark, It’s a possibility we could do something on Wednesday this week perhaps — but if not maybe someone else from the list could do it? I think it’d be advantageous to use your expertise though. Maybe Tom Saxton could help out too? Tom? Nikki. On 16 Dec 2013, at 06:25, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Nikki,
That would be really wonderful to do, and with your setup relatively easy.
Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January.
Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there.
Regards, Mark.
On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc?
We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces.
Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Tom, myself, and maybe someone from Europe with an Ampera? Regards, Mark. On 16 Dec, 2013, at 3:02 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
Hi Mark,
It’s a possibility we could do something on Wednesday this week perhaps — but if not maybe someone else from the list could do it? I think it’d be advantageous to use your expertise though.
Maybe Tom Saxton could help out too?
Tom?
Nikki.
On 16 Dec 2013, at 06:25, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Nikki,
That would be really wonderful to do, and with your setup relatively easy.
Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January.
Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there.
Regards, Mark.
On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc?
We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces.
Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
how can i help? Volt, Europe, Deutschland/Germany NO PicKit 2 or 3! Have ICD 3 (Lot better IMHO, but more expensive) Bye Michael J. Am 16.12.2013 um 08:04 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
Tom, myself, and maybe someone from Europe with an Ampera?
Regards, Mark.
On 16 Dec, 2013, at 3:02 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
Hi Mark,
It’s a possibility we could do something on Wednesday this week perhaps — but if not maybe someone else from the list could do it? I think it’d be advantageous to use your expertise though.
Maybe Tom Saxton could help out too?
Tom?
Nikki.
On 16 Dec 2013, at 06:25, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Nikki,
That would be really wonderful to do, and with your setup relatively easy.
Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January.
Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there.
Regards, Mark.
On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc?
We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces.
Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Okay! This is awesome! As we’re working to a tight schedule, and the holidays are almost upon us… how about we schedule this for a Saturday in January? Thoughts? Nikki. On 17 Dec 2013, at 20:31, Michael Jochum <mikeljo@me.com> wrote:
how can i help?
Volt, Europe, Deutschland/Germany NO PicKit 2 or 3! Have ICD 3 (Lot better IMHO, but more expensive)
Bye Michael J.
Am 16.12.2013 um 08:04 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
Tom, myself, and maybe someone from Europe with an Ampera?
Regards, Mark.
On 16 Dec, 2013, at 3:02 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
Hi Mark,
It’s a possibility we could do something on Wednesday this week perhaps — but if not maybe someone else from the list could do it? I think it’d be advantageous to use your expertise though.
Maybe Tom Saxton could help out too?
Tom?
Nikki.
On 16 Dec 2013, at 06:25, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Nikki,
That would be really wonderful to do, and with your setup relatively easy.
Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January.
Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there.
Regards, Mark.
On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc?
We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces.
Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Nikki, Sounds good. I will be back to civilization on 4th Jan, so anytime after that is fine for me. Regards, Mark. On 18 Dec, 2013, at 6:21 am, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
Okay! This is awesome!
As we’re working to a tight schedule, and the holidays are almost upon us… how about we schedule this for a Saturday in January?
Thoughts?
Nikki.
On 17 Dec 2013, at 20:31, Michael Jochum <mikeljo@me.com> wrote:
how can i help?
Volt, Europe, Deutschland/Germany NO PicKit 2 or 3! Have ICD 3 (Lot better IMHO, but more expensive)
Bye Michael J.
Am 16.12.2013 um 08:04 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
Tom, myself, and maybe someone from Europe with an Ampera?
Regards, Mark.
On 16 Dec, 2013, at 3:02 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
Hi Mark,
It’s a possibility we could do something on Wednesday this week perhaps — but if not maybe someone else from the list could do it? I think it’d be advantageous to use your expertise though.
Maybe Tom Saxton could help out too?
Tom?
Nikki.
On 16 Dec 2013, at 06:25, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Nikki,
That would be really wonderful to do, and with your setup relatively easy.
Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January.
Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there.
Regards, Mark.
On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc?
We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces.
Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
If you want me on the call, I'm free January 4th and 25th. Do you want to do a Doodle to figure out what date works best? Tom -----Original Message----- From: Nikki Gordon-Bloomfield <nikki@aminorjourney.com> Reply-To: OVMS Developers <ovmsdev@lists.teslaclub.hk> Date: Tuesday, December 17, 2013 at 2:21 PM To: OVMS Developers <ovmsdev@lists.teslaclub.hk> Subject: Re: [Ovmsdev] YouTube Google Hangout
Okay! This is awesome!
As we¹re working to a tight schedule, and the holidays are almost upon us how about we schedule this for a Saturday in January?
Thoughts?
Nikki.
On 17 Dec 2013, at 20:31, Michael Jochum <mikeljo@me.com> wrote:
how can i help?
Volt, Europe, Deutschland/Germany NO PicKit 2 or 3! Have ICD 3 (Lot better IMHO, but more expensive)
Bye Michael J.
Am 16.12.2013 um 08:04 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
Tom, myself, and maybe someone from Europe with an Ampera?
Regards, Mark.
On 16 Dec, 2013, at 3:02 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
Hi Mark,
It¹s a possibility we could do something on Wednesday this week perhaps but if not maybe someone else from the list could do it? I think it¹d be advantageous to use your expertise though.
Maybe Tom Saxton could help out too?
Tom?
Nikki.
On 16 Dec 2013, at 06:25, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Nikki,
That would be really wonderful to do, and with your setup relatively easy.
Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January.
Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there.
Regards, Mark.
On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I¹d be happy to drive¹ the desk as it were, if other people were happy to help explain stuff etc?
We¹ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don¹t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I¹m going on a fairly long Xmas trip in a few weeks, so it¹d be a good chance to put OVMS through its paces.
Third, I¹ve heard from some users who say they can¹t get the Pickit 2/3 working with the software now available online, because the required libraries aren¹t available any more. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Okay folks! As prepared here: I would like to invite you to the Doodle poll "Open Vehicle Monitoring System Google Hangout." Please follow the link in order to participate in the poll: http://doodle.com/n7sx6izweggxwptf Nikki Gordon-Bloomfield http://about.me/aminorjourney/bio email: nikki@transportevolved.com tel: +44 7901 553308 On 18 Dec 2013, at 01:41, Tom Saxton <tom@idleloop.com> wrote:
If you want me on the call, I'm free January 4th and 25th. Do you want to do a Doodle to figure out what date works best?
Tom
-----Original Message----- From: Nikki Gordon-Bloomfield <nikki@aminorjourney.com> Reply-To: OVMS Developers <ovmsdev@lists.teslaclub.hk> Date: Tuesday, December 17, 2013 at 2:21 PM To: OVMS Developers <ovmsdev@lists.teslaclub.hk> Subject: Re: [Ovmsdev] YouTube Google Hangout
Okay! This is awesome!
As we¹re working to a tight schedule, and the holidays are almost upon usŠ how about we schedule this for a Saturday in January?
Thoughts?
Nikki.
On 17 Dec 2013, at 20:31, Michael Jochum <mikeljo@me.com> wrote:
how can i help?
Volt, Europe, Deutschland/Germany NO PicKit 2 or 3! Have ICD 3 (Lot better IMHO, but more expensive)
Bye Michael J.
Am 16.12.2013 um 08:04 schrieb Mark Webb-Johnson <mark@webb-johnson.net>:
Tom, myself, and maybe someone from Europe with an Ampera?
Regards, Mark.
On 16 Dec, 2013, at 3:02 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
Hi Mark,
It¹s a possibility we could do something on Wednesday this week perhaps ‹ but if not maybe someone else from the list could do it? I think it¹d be advantageous to use your expertise though.
Maybe Tom Saxton could help out too?
Tom?
Nikki.
On 16 Dec 2013, at 06:25, Mark Webb-Johnson <mark@webb-johnson.net> wrote:
Nikki,
That would be really wonderful to do, and with your setup relatively easy.
Only issue may be timing. I'm heading off on Thursday for a few weeks, and will have pretty lousy and unreliable Internet upload bandwidth. Only getting back to civilisation (as defined by >256kbps upload bandwidth) early January.
Regarding the Leaf, I'm pretty close to having something working - I'll make you a .hex file and send a link to the list. Without the car, it has proven to be extremely hard work (I'm having to write a simulator as well as the car module, and have no ability to properly test either). We really need to find someone enthusiastic who can help with the actual coding of this (but who has the car). I'm convinced we can technically get the entire functionality of something like leafspy into the module and apps, but it will be take some trial-and-error to get there.
Regards, Mark.
On 15 Dec, 2013, at 10:17 pm, Nikki Gordon-Bloomfield <nikki@aminorjourney.com> wrote:
> HI folks, > > Yesterday, I held a quick hangout showing people how to upgrade the > firmware on V2 hardware. I shared it onto YouTube. > http://www.youtube.com/watch?v=MXaRWT8LAmY using the > TransportEvolved account (the site I own/write forŠ > www.transportevolved.com) > > Several folks asked if we could hold a hangout explaining how to > use OVMS from the start. Maybe we could arrange something here with > a couple of folks on board? I¹d be happy to Œdrive¹ the desk as it > were, if other people were happy to help explain stuff etc? > > We¹ve got a lot of noobs now wanting to take part in the project, > which is excellent, but a YouTube primer may give us all some extra > ground for the project. > > Second, (for Mark) You said you were hoping to have alpha code for > the LEAF today. If you do have it, would you be willing to package > it up for me (I don¹t have the compiling tools on hand so > pre-packaged .hex files work best for me)? > > I¹m going on a fairly long Xmas trip in a few weeks, so it¹d be a > good chance to put OVMS through its paces. > > Third, I¹ve heard from some users who say they can¹t get the Pickit > 2/3 working with the software now available online, because the > required libraries aren¹t available any moreŠ. Thoughts? > > Nikki. > > _______________________________________________ > OvmsDev mailing list > OvmsDev@lists.teslaclub.hk > http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
Hi, Nikki, Kevin Sharpe and a few others know me but for everyone else... I live near Plymouth, Devon, UK, and I am very interested in OVMS. I have had a Leaf for 2 1/2 yrs (delivered same day as Nikki IIRC) and a Vauxhall Ampera for 1 1/2 yrs. I am an experienced programmer but very out of practice and I run my own small web development/hosting company. So I am OK at web site development (not so good at design - no artistic talent at all!) in LAMP as well as Microsoft stuff (WinSvr, MSSQL etc & I have MCSD, MCSE, MCDBA). As I say, I am up to speed with LAMP/WAMP and web/hosting stuff and I am pretty good with databases but as far as programming goes I would say I am mostly out of practice so what I do I do slowly! I am sure I'd pick up speed with practice though but I wouldn't suggest I tackle anything major just yet! I am not sure how I can help but as I have both a Leaf and Ampera I would like to help out where I can... no matter what it is. I picked up on Nikki possibly doing a hangout on OVMS 101 which might be great for me as I know pretty much nothing right now so I thought I'd say hi and make myself known. As I say, I know pretty much nothing about OVMS, CAN busses or anything else but keen to learn and as I am self-employed with very little work right now I have a fair bit of time to offer. So, I hope that Nikki does the OVMS 101... I'll be there! In the meantime, if there is anything I can do please say. Paul Churchley On 15 December 2013 14:17, Nikki Gordon-Bloomfield <nikki@aminorjourney.com>wrote:
HI folks,
Yesterday, I held a quick hangout showing people how to upgrade the firmware on V2 hardware. I shared it onto YouTube. http://www.youtube.com/watch?v=MXaRWT8LAmY using the TransportEvolved account (the site I own/write for… www.transportevolved.com)
Several folks asked if we could hold a hangout explaining how to use OVMS from the start. Maybe we could arrange something here with a couple of folks on board? I’d be happy to ‘drive’ the desk as it were, if other people were happy to help explain stuff etc?
We’ve got a lot of noobs now wanting to take part in the project, which is excellent, but a YouTube primer may give us all some extra ground for the project.
Second, (for Mark) You said you were hoping to have alpha code for the LEAF today. If you do have it, would you be willing to package it up for me (I don’t have the compiling tools on hand so pre-packaged .hex files work best for me)?
I’m going on a fairly long Xmas trip in a few weeks, so it’d be a good chance to put OVMS through its paces.
Third, I’ve heard from some users who say they can’t get the Pickit 2/3 working with the software now available online, because the required libraries aren’t available any more…. Thoughts?
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
participants (5)
-
Mark Webb-Johnson -
Michael Jochum -
Nikki Gordon-Bloomfield -
Paul Churchley -
Tom Saxton