[image: image.png] [image: image.png] Hello All, Been trying to get Amperae support working. Did some work in the config and tried to upload this to the module but it failed. I do not know what went wrong. Followed the developers guide. Any advice welcome. Edwin
On 4/21/21 9:39 AM, Edwin ten Haaf wrote:
image.png image.png
I don't understand what causes the "state is inconsistent" but I've found that 99% of the time if you dismiss the popup and re-try it'll work.
Been trying to get Amperae support working. Did some work in the config and tried to upload this to the module but it failed. I do not know what went wrong. Followed the developers guide. Any advice welcome.
You should consider upgrading your toolchain, I think 1.22.0.80 is missing some psram workarounds that 1.22.0.97 has. Craig
A few issues: Your ‘expected file size is 185’ is wrong. Much too small. Should be >3MB for current firmware. Perhaps your URL path is incorrect, or some other issue with the download from the web server. You need to update your ESP IDF tools crosstool-ng to 1.22.0-97. That is in the xtensa-esp32-elf package. Run 'xtensa-esp32-elf-gcc -v’ to see your current version. Regards, Mark.
On 22 Apr 2021, at 12:39 AM, Edwin ten Haaf <edwin@familietenhaaf.nl> wrote:
<image.png> <image.png>
Hello All,
Been trying to get Amperae support working. Did some work in the config and tried to upload this to the module but it failed. I do not know what went wrong. Followed the developers guide. Any advice welcome.
Edwin _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
participants (3)
-
Craig Leres -
Edwin ten Haaf -
Mark Webb-Johnson