Hi Jeff, there's a really good trouble shooting guide on the OVMS website: http://www.openvehicles.com/helpme Also, serial port params are 9600 8N1, no handshake -- see OVMS development PDF for more. Regards, Michael Am 26.07.2014 08:39, schrieb Aatheus:
Hi all
I just got my OVMS v2 module, with GeoSIM. I registered the SIM online, then tried to putting it into the OVMS SIM socket. I provisioned the module via the SMS provisioning page (using the +44 number). However, the board seems to be looping while trying to start up.
The board blinks its version OK (2.6.5), then starts trying to connect. I see 10 green blinks for a few iterations. Then the board blinks 6 green for about a minute. Then both lights come on solid for about 15-20 seconds. Then a pause, then six blinks. Repeat until the end of time. This 6 blinks for a minute, solid on for 15-20 seconds, then 6 blinks loop never ends.
What could be going on? I tried connecting to the diag port via serial (115k 8n1 none) and am getting nothing. I tried with hardware flow control on as well. Still nothing. I tried reflashing the board via PICkit2 and redoing the provisioning. Still no good.
Thanks! -Jeff
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-- Michael Balzer * Paradestr. 8 * D-42107 Wuppertal Fon 0202 / 272 2201 * Handy 0176 / 206 989 26