Hi. Initial results after 27 miles on this new timing in the Leaf 2016. No in-car issues yet experienced. Stats are as below. OVMS# can can1 status CAN: can1 Mode: Active Speed: 500000 DBC: none Interrupts: 20760013 Rx pkt: 20753155 Rx ovrflw: 6 Tx pkt: 2983 Tx delays: 103 Tx ovrflw: 0 Tx fails: 2527 Err flags: 0x008040d9 Rx err: 0 Tx err: 128 Rx invalid: 0 Wdg Resets: 0 Wdg Timer: 6 sec(s) Err Resets: 1 OVMS# can can2 status CAN: can2 Mode: Active Speed: 500000 DBC: none Interrupts: 12559716 Rx pkt: 12581843 Rx ovrflw: 0 Tx pkt: 88 Tx delays: 0 Tx ovrflw: 0 Tx fails: 0 Err flags: 0x01000001 Rx err: 0 Tx err: 0 Rx invalid: 0 Wdg Resets: 0 Wdg Timer: 2 sec(s) Err Resets: 0 The logs show the usual mix of occasional can2 0x23401c01 & 0x22401c02 errors, indicating a busy state but not excessively so. I also saw 0x22001002 while driving this morning, in the middle of those others and a few minutes later when coming in range of home wifi. The few log messages for can1 are of a different nature. 0x8048d9 was logged twice last night while parked and locked, with nothing going on. And this morning, 5.5 seconds after CAR IS OFF, it reports: esp32can: can1 stuck bus-off error state (errflags=0x00040c00) detected - resetting bus I'll now set can1 into listen mode to see what difference that makes. Chris