Did you make sure the little switch on the board is slid towards the LED's? That will enable GPRS. There is a good picture is the user's manual. Jack On Dec 18, 2013, at 8:23 PM, ovmsdev.adelman@adelman.com wrote:
I previously had a v1 module on my 2.0 Tesla Roadster, and decided to upgrade to a v2 module. I'm having no such luck.
I pulled the SIM card from the old module (AT&T GoPhone in the USA), installed it in the new, put it in the car, and provisioned with SMS from my own cellphone (REGISTER, PASS, SERVER 64.111.70.50 mypass, GPRS WAP.CINGULAR - -, MODULE US549 M SMSIP TR) I set all of the feature codes the same as my previous v1 module. When I query it with "GPRS?" I get back APS: WAP.CINGULAR, User:, Pass:, GSM:AT&T, GSM:OK, and Server: Not Connected. Sometimes I see "Server: Not Connected (0x0041)".
DIAG shows RED Led:7, GREEN Led: 5, NET State: 0x0041, 12V Line:11.6 ref=0.6, Crashes:1 ..last: RI - 240.
I'm stumped. Any suggestions on how to debug why this module won't connect via GPRS?
I've tried power-cycling...
Ken _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev