My OVMS v3.1 has been installed in the car for some hours and now the network operations are stuck in some way. I detected this when I found that the app had no status for two hours. When I connect to the USB console, I see the reason: I (28236429) ovms-server-v2: Connection is api.openvehicles.com:6867 US33 I (28236429) ovms-server-v2: Status: Connecting... W (28254039) ovms-server-v2: Connection failed E (28254039) ovms-server-v2: Status: Error: Connection failed I (28254239) ovms-server-v2: Status: Disconnected I (28273429) ovms-server-v2: Connection is api.openvehicles.com:6867 US33 I (28273429) ovms-server-v2: Status: Connecting... W (28290959) ovms-server-v2: Connection failed E (28290959) ovms-server-v2: Status: Error: Connection failed I (28291159) ovms-server-v2: Status: Disconnected And now, as I look, a variation: I (28527429) ovms-server-v2: Connection is api.openvehicles.com:6867 US33 I (28527429) ovms-server-v2: Status: Connecting... E (28533869) ovms-server-v2: mg_connect(api.openvehicles.com:6867) failed: cannot parse address| E (28533869) ovms-server-v2: Status: Error: Connection failed I (28547429) ovms-server-v2: Connection is api.openvehicles.com:6867 US33 I (28547429) ovms-server-v2: Status: Connecting... E (28553979) ovms-server-v2: mg_connect(api.openvehicles.com:6867) failed: cannot parse address| E (28553979) ovms-server-v2: Status: Error: Connection failed OVMS# network status Interface#3: pp3 (ifup=1 linkup=1) IPv4: 10.170.41.247/255.255.255.255 gateway 10.64.64.64 Interface#2: ap2 (ifup=1 linkup=1) IPv4: 192.168.4.1/255.255.255.0 gateway 192.168.4.1 Interface#1: st1 (ifup=1 linkup=1) IPv4: 192.168.1.82/255.255.255.0 gateway 192.168.1.254 DNS: 192.168.1.254 Default Interface: st1 (192.168.1.82/255.255.255.0 gateway 192.168.1.254) OVMS# wifi status Power: on Mode: Access-Point + Client mode STA SSID: Revelstoke MAC: 30:ae:a4:43:9c:28 IP: 192.168.1.82/255.255.255.0 GW: 192.168.1.254 AP SSID: US33 MAC: 30:ae:a4:43:9c:29 IP: 192.168.4.1 AP Stations: 0 Anything else to look at before I reset? The module does respond to ping, but not to the web browser nor ssh on the STA wifi. -- Steve