Attached is a recent posting here with some readings from Glyn and myself. Regards, Mark.
Date: Wed, 23 Oct 2019 21:31:16 +0800 From: Mark Webb-Johnson <mark@webb-johnson.net <mailto:mark@webb-johnson.net>> To: OVMS Developers <ovmsdev@lists.openvehicles.com <mailto:ovmsdev@lists.openvehicles.com>> Subject: Re: [Ovmsdev] OVMS V3 power consumption readings Message-ID: <29BFF543-9FDC-4EF7-A8B8-1F8ED92FCDD8@webb-johnson.net <mailto:29BFF543-9FDC-4EF7-A8B8-1F8ED92FCDD8@webb-johnson.net>> Content-Type: text/plain; charset="utf-8"
Glyn,
Powered exclusively by ext12v, @12v, I get:
Wifi off/sleeping: 25mA Wifi only: 49mA Wifi + 3G: 85mA
Powered exclusively by USB, @5v, I get:
Wifi off/sleeping: 46mA Wifi only: 104mA Wifi + 3G: 180mA
Note that in areas of low signal, the 3G power consumption can be higher. Similarly, if GPS is enabled that can have an affect as well. I?ve never seen it go over about 220mA (and even that was just for short bursts).
If I power it from both USB and 12V simultaneously, I get:
Wifi off/sleeping: 8mA (USB 5v) and 19mA (ext 12v) Deep sleep: 8mA (USB 5v) and <1mA (ext 12v)
(The 8mA is mostly from the CP2102 which is powered off when not in use)
Regards, Mark
On 22 Oct 2019, at 2:41 AM, Glyn Hudson <glyn.hudson@openenergymonitor.org <mailto:glyn.hudson@openenergymonitor.org>> wrote:
I've just measured the power consumption of the OVMS V3 module using a bench power supply set to exactly 12.0V.
OVMS consumed:
60mA = 0.72W with WiFi on (AP active) and GSM/GPS modem off 100mA = 1.2W with everything switched on.
This is less than I was expecting, I would take weeks for OVMS to drain a healthy lead acid battery.
-- All the best,
Glyn Hudson +44(0)1248672607
https://openenergymonitor.org <https://openenergymonitor.org/> https://zerocarbonadventures.co.uk <https://zerocarbonadventures.co.uk/> _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com <mailto:OvmsDev@lists.openvehicles.com> http://lists.openvehicles.com/mailman/listinfo/ovmsdev <http://lists.openvehicles.com/mailman/listinfo/ovmsdev>
On 11 Nov 2019, at 10:50 PM, Fran Terry <fajterry@gmail.com> wrote:
Hello One and All.
Sorry if this question has already been asked, how much current draw does one expect from V3?
Thanks
Fran _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev