Am 22.11.19 um 07:25 schrieb Craig Leres:
As I understand it, there is no control over simcom power just control of an input to simcom that requests that it powers off (or on). So is the problem that it's possible to wedge the simcom in such a way that it ignores the control input?
Most likely. What firmware version do you have on the SIMCOM? We've found differences in bug behaviour already: https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/issues/284#... My modules have: * v3.0 module, modem board v1.0: 35316*B10*SIM5360E * older v3.1 module, modem board v1.1: 35316*B11*SIM5360E * newer v3.1 module, modem board v1.1: 35316*B09*SIM5360E I don't have a 3.2 module or US modems to check. Interestingly, the B11 version for the 5360E isn't even downloadable at SIMCOM: https://simcom.ee/documents/?dir=SIM5360 I've found later versions (up to B13) and release notes listed only here: https://techship.com/products/simcom-sim5360e-mpcie-sim/ …but you need an account to access them and must accept an NDA. Regards, Michael -- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26