The code tested on Peugeot iOn with 88 cell. Can you create a log for me from can messages about 5 sec? I can see whats the difference in 80 cell can messages. I use the following to create log from can messages. Connect to ovms via ssh: ssh -c aes128-cbc ovms@192.168.4.1 - re start - re mode serve - re serve format crtd Then, on workstation: - nc 192.168.4.1 3000 | tee log.crtd And the send me the log.crtd file. Michael Eric Menk <mikeemenk@gmail.com> ezt írta (időpont: 2019. jan. 19., Szo, 14:08):
There is a bug in MIEV code, that bombs the web GUI and phone APP with BMS errors.
I suspect that this is because the Peugeot and Citroen branded MIEVs have a 80 cell battery pack vs MIEVs 88cells.
Sample of a message:
Voltage: SD=1mV OK Temperature: SD=1.4C !6:+3.1C !16:+3.1C !18:+3.1C
The missing cells could also be used to set the voltage gauge. There are two LEV50-4 missing in the 80 cell pack, number 06 and 12. If a flagg is set while looping the CAN massages, then the flag can be used inside OvmsVehicleMitsubishi::GetDashboardConfig to set correct voltage. The float charge voltage of the 80 cell pack is 328.4 volt
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Üdvözlettel: Kovács Tamás