There seems to be a compilation warning: $ make -j 4 Build version is 3.1.011-21-g5d46d82 CXX build/main/ovms_version.o In file included from main/ovms_version.cpp:34:0: esp/esp-idf/components/bootloader_support/include/esp_image_format.h:44:3: warning: 'esp_image_spi_freq_t' defined but not used [-Wunused-variable] } esp_image_spi_freq_t; ^ I merged it, to allow further testing on ‘edge’ boxes, but it would be good if that could be cleaned up. Regards, Mark.
On 14 Nov 2018, at 3:46 PM, Craig Leres <leres@xse.com> wrote:
Could you extend the ‘ota status’ command to show the same?
It was easier than I thought so I wrapped this up tonight and created a pull request:
https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/pull/169/fi...
Appended is sample output from "ota status".
Craig
OVMS# ota status Firmware: 3.1.011-21-g482c9d3/factory/main (build idf v3.1-dev-1586-g65355d28 Nov 13 2018 23:39:54) Running partition: factory Boot partition: factory Factory image: 3.1.011-21-g482c9d3 OTA_O image: 3.1.011 OTA_1 image: 3.1.011-16-gb8dc60e Server Available: 3.1.011 (no update required)
[...]