Tom, I've copied Marks info on retrieving the flash image from this mailing list to the developer manual: https://docs.google.com/document/d/1q5M9Lb5jzQhJzPMnkMKwy4Es5YK12ACQejX_NWEi... You can also do an fsck run on the image and write back the (hopefully salvaged) image. Regards, Michael Am 12.08.2018 um 00:19 schrieb Tom Parker:
Hi,
My OVMS v3 prototype appears to have lost it's configuration. It stopped talking to the server a few days ago and power cycling wasn't helping. I had a chance to see what was on the serial console today. The OVMS prompt and command interface is working normally, but there doesn't appear to be anything configured. I'm still using a startup script I wrote before we had the configuration gui, and that doesn't appear to execute at startup. If I do a vfs ls /store then the command line interface hangs and I have to power cycle it to get it back. I don't have the wifi turned on so I don't know if the web interface works after doing this.
This behaviour is repeatable, I if I power cycle the module the config is still missing and vfs ls /store still hangs.
What is the best way to debug it? Michael appears to have had a similar problem in https://github.com/openvehicles/Open-Vehicle-Monitoring-System-3/issues/151 how do I dump the flash to investigate why listing the directory hangs the command line interface?
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26