Hi Anko, I will update it. Rob --- On Sun, 03 Feb 2019 02:24:11 +0000 Anko Hanse <mailto:anko_hanse@hotmail.com> wrote ---- With the inclusion of fix #170, "Fix for 0% SOH on 30KWh models with Nissan BMS update" in the new 3.2.001 firmware, the user guide needs updating. I do not seem to have the right to do that, so can someone do it for me? It concerns the "OVMS v3 Advanced User Guide", Chapter "NL Nissan Leaf", section "Configuration": - The former [2016] section title should be updated to [2016-2017] - The section about the 30 kwh models should be taken out of the [2016-2017] section and into its own section (there are 2015 30 kwh models, I own one…) - The new section about the 30kwh models needs an extra command to also update the "newCarAh" setting to 79 (from 66) Full new text: [2011-2015 models] To enable remote commands, either Unplug any CARWINGS, Nissan Connection or TCU units or on Generation 1 Cars, wire the RC3 to TCU pin 11 (see MyNissanLeaf post) [2016-2017 models] Set the model year as follows config set xnl modelyear 2016 or config set xnl modelyear 2017 [30 kwh models] For models with a 30 kwh battery pack, set the capacity manually as follows config set xnl maxGids 356 config set xnl newCarAh 79 _______________________________________________ OvmsDev mailing list mailto:OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev