Tamás, Yes, it seems SD CARD is too slow. Can you check ‘config list sdcard’ and see if you have a ‘maxfreq.khz’ value set? The default is 16000. If you have a reasonably modern OVMS module, or are running from USB power (even if 12v is connected as well), you can set: config set sdcard maxfreq.khz 20000 and reboot, to improve the SD CARD write speed. The 1R11 means reception of a 11bit (standard) CAN message on CAN1 bus. A 1T11 would mean transmission. I think you should be able to download via the browser - personally, I just scp the files off the module over wifi. Regards, Mark.
On 15 Jun 2019, at 1:58 AM, Tamás Kovács <kommykt@gmail.com> wrote:
I want to create log file from can messages while Lexia connected to obd, but many message has dropped. My sd card is too slow to write all data?
I start logging with can log crtd /sd/lexia.crtd command
Closing log: Type:crtd; Path:'/sd/lexia.crtd'; Filter:off; Vehicle:MI; Statistics: total messages: 3334194, dropped: 2707476 = 81.2%
In can log i can see the incoming messages? This is a RX message: 175594.785 1R11 346 27 10 40 00 00 00 00 42 if 1R11 is 1T11 this is a TX message on CAN1? How can i download the log file, the easiest way, because if i use browser and add the file url (ip/lexia.crtd) the browser load its content.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev