Soko, polling may keep the car awake, that's also an issue on the Kia e-Niro IIRC. Changing the PollState can only affect the car indirectly via the changed polls. Maybe you could add your code & a log? Regarding the poll replies stopping, is that also reflected in a CAN log? Maybe the OBD gateway throttles if it sees too many requests? (Hopefully not…) If the gateway does throttling: do you login to the OBD as a "tester" and keep the session active by periodically sending the "tester present" frame? Regards, Michael Am 02.08.20 um 19:30 schrieb Soko:
Heya again,
I'm trying to develop a detection for when the car is off/locked but I'm encountering a weird phenomena:
* Car is shut down and locked * OVMS connected * CAN poll for voltage (only one poll value active) with 30 secs fails with error (so far nothing weird) * Unlock the car via car-key remote * Poll succeeds and I'm switching from PollState=0 to PollState=1 where I poll every 2 secs * Lock the car via car-key remote * _After 1 hour the polls still work and the car is active_
Is something like this known from other vehicles? So basically my car never shuts down :(
Another secondary weird thing: When increasing the time to 5 secs for PollState=1 the polls get no reply and after 20 secs I swap back to PollState=0. BUT the second the PollState changes the car replies again... Even more weirdness: When PollState=1 time is 10 secs and I swap back to Pollstate=0 after 40 secs the same thing happens! Immediately I swap to PollState=0 the car replies again. As if the PollState switching somehow wakes the car up??!
Any ideas?
Soko
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26