Hi & welcome Andi :-) It seems Eddy Vromen was the last to set up the build environment on windows: http://lists.openvehicles.com/pipermail/ovmsdev/2020-April/006779.html Maybe he can help you on details, but setup should generally still be straight forward following the developer guide. And no, PlatformIO is not an option. Chris' latest work on the UpMiiGo integration isn't merged into the master yet. He already has added a config option towards supporting direct OBD2 connections. To contribute to that, fork/attach to his repository: https://github.com/devmarxx/Open-Vehicle-Monitoring-System-3 Sadly, my Mii is still months away… From the discussion on the GE forum I also think it's better to connect via OBD2, the Comfort-CAN port seems to be too limited (by security design). It's a good idea to reuse the existing shark fin antenna though, maybe simple antenna cable extensions can be used so we can place the module near the OBD2 port. I don't think using a bluetooth OBD2 dongle is an option, as that would add a significant continuous current draw. If you haven't already, check out the list of UpMiiGo OBD2 codes already collected on Goingelectric: https://www.goingelectric.de/wiki/Liste-der-OBD2-Codes/ Regards, Michael Am 08.07.20 um 09:13 schrieb Soko:
Hey,
I'm Soko and live in Austria/Europe. I'm a programmer since 20 years now, mainly (big) Windows applications (PowerBuilder, C#, .NET) with databases (MSSQL, Oracle, ...).
I also dabble in Arduino/ESP32 programming with little projects for my home since 2 years.
I've just bought the new version of the Volkswagen e-Up (equals Skoda citigo and Seat Mii) and was directed to your project by some guys over at www.goingelectric.de.
I'd like to contribute to OVMS by adding the e-Up using the standard OBD2 cable (not the Komfort-CAN).
My first hurdle though is to get the development environment under Windows up and running. Which seems to be a big task by itself. I guess using Visual Studio Code with PlatformIO (as I do for my Arduino projects) is no option, correct?
I have to use this special "ESP IDF" to make it work...
Is there any better/newer guide for me than page 6 of the developer guide doc?
Thanks
Andi
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26