Michael, thanks for the explanation. Still I'm wondering why the same command works when issued from the third-party OBD adapter... are there any setup commands I could look out for? sharkcow Am 03.10.20 um 20:08 schrieb Michael Balzer:
sharkcow,
0x22 is VEHICLE_POLL_TYPE_OBDIIEXTENDED and well supported, see vehicle module.
See the PDF I just sent you on page 252:
Error code 0x31: requestOutOfRange
This response code indicates that the requested action will not be taken because the server has detected that the request message contains a parameter which attempts to substitute a value beyond its range of authority (e.g. attempting to substitute a data byte of 111 when the data is only defined to 100), or which attempts to access a dataIdentifier/routineIdentifer that is not supported or not supported in active session. This response code shall be implemented for all services which allow the client to read data, write data or adjust functions by data in the server.
Regards, Michael
Am 03.10.20 um 14:59 schrieb sharkcow:
I'm having trouble getting a multiline OBD message to be read by OVMS. What exactly does error code 31 mean?
In the OVMS log I see:
D (806212) vehicle: PollerSend(0): send [bus=1, type=22, pid=1821], expecting 713/77d-77d D (806222) vehicle: PollerReceive[77D]: process OBD/UDS error 22(1821) code=31
The only messages with header 713 and 77D in the CAN log are:
1601729078.788373 1T11 713 03 22 18 21 00 00 00 00 1601729078.801032 1R11 77D 03 7f 22 31 aa aa aa aa
However, when I log with OVMS what happens when a working third-party OBD-adapter issues the command, I see:
1601721047.201952 1R11 713 03 22 18 21 55 55 55 55 1601721047.210050 1R11 77D 10 2f 62 18 21 01 fe 00 1601721047.210695 1R11 713 30 ff 01 55 55 55 55 55 1601721047.214801 1R11 77D 21 00 16 15 00 00 02 20 1601721047.219865 1R11 77D 22 00 00 00 04 00 00 00 1601721047.224808 1R11 77D 23 00 00 00 15 91 00 00 1601721047.230282 1R11 77D 24 01 66 00 00 00 00 00 1601721047.235039 1R11 77D 25 00 00 00 00 fe c9 c9 1601721047.240117 1R11 77D 26 c9 c9 ff fe ff ff aa
Does OVMS even support multiline OBD messages? Are there any settings I should adjust? Any clues? :)
I'm guessing the intermediate "713 30 ff 01" an acknowledge for the multiline response, does/can OVMS send that?
Thanks for any hints!
sharkcow _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev