Welcome Robert :-) Basic setup of the Kia firmware is the same as for other models. So you can follow the Roadster guide or one of the Twizy guides first. You wrote to me you got the module from a friend, so you should first flash once without preserving EEPROM to get a clean config to start with. Follow Marks link to the support FAQ if you get stuck in the config process. To diag LED flash codes, also take a look at the state machine diagram in the main docs folder. If you need help, describe exactly (!) which doc you've been following and what you have done so far. If you're stuck at 10/9... maybe you should first check if the SIM card has contact. Kia V0.1 only reads some first status messages and obtains the VIN if you enable CAN write access (FEATURE 15 1). I've currently got one positive and one negative test feedback for this version. Would be great if you could also check V0.2 -- it's in my account on github: https://github.com/dexterbg/Open-Vehicle-Monitoring-System ...hex: http://dexters-web.de/f/kiasoul/OVMS-KiaSoul-0.2.zip This _should_ be able to show some first OBD diag data dumps (DEBUG 1 / 5)... as I don't have a Kia, I need qualified beta test feedback. Regards, Michael Am 31.10.2015 um 14:16 schrieb Robert Cotran:
Hi all,
I'm replying to Micheal Balzer's email from yesterday. I wasn't on the mailing list until late yesterday afternoon, hence I'm not able to click reply.
I've got a Kia Soul EV 2016 in Canada which doesn't have the UVO services, so this is of great interest to me.
I have the OVMS kit in front of me, but I'm a total newbie, so I'm reading through some guides to get started.
Just wanted to say that I'll gladly be the guinea pig for this.
What I'd REALLY like is to have a way to remotely turn on the climate control system to warm up/cool down the car at will. Hopefully that's a remote possibility. Tracking it is cool, but controlling it is even better. I'm used to a Tesla (my other car), so I am quite spoiled.
I did get Micheal's firmware installed on the OVMS and hooked it up to the car but it's not booting properly (based on status LEDs). Can that be because of the firmware or is the bootup sequence separate from the car-control code?
The LEDs flash like - 10 Green, 9 Green, 10 Green, 9 Green, then a few reds, then green and red flash together really fast.
I tried sending text messages to the board and no dice.
Any help would be appreciated, looking forward to getting this working!
Robert _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26