Soko, 0x22028C isn't a PID, it's an OBD2 command (0x22 = poll extended ID) + the actual register address 0x028C to be polled. And 0x7E5 isn't a header, it's probably the address of the OBD2 device you're polling (txmoduleid) OBD2 is a subset of ISO-TP, in ISO-TP devices can be addressed at any ID and respond at any ID. The OBD2 base protocol defines a broadcast address at 0x7DF, and assigned device addresses in the range 0x7E0 - 0x7E7. Replies shall be sent at the device address + 8, so the reply for a poll to 0x7E5 would normally be coming from 0x7ED (rxmoduleid). That are the basic principles of the OBD2 protocol, see https://en.wikipedia.org/wiki/OBD-II_PIDs#CAN_(11-bit)_bus_format . So your poll could for example be defined as: const OvmsVehicle::poll_pid_t vwup_poll[] = { // Note: poller ticker cycles at 3600 seconds = max period // { txid, rxid, type, pid, { period_off, period_drive, period_charge } } { 0x7E5, 0x7ED, VEHICLE_POLL_TYPE_OBDIIEXTENDED, 0x028C, { 0, 10, 60 } }, { 0, 0, 0, 0, { 0, 0, 0 } } }; See vehicle.h for OBD2 commands (poll types) currently supported. See the other vehicles for examples of complex poll definitions. Regards, Michael Am 25.07.20 um 20:09 schrieb Soko:
Heya,
Another thing I can't figure out at the moment. I have to poll the VWeUp and I figured out (hopefully) how to do that. But I have no clue how to translate the "usual" ELM327 Header+PID to one entry for the OvmsVehicle::poll_pid_t
The only value I've understood is the polltime. On my OBD2 interfaces I use a PID of 0x22028C for SoC. But PID is here only 16 bit! Where do I put the header 7E5? What is txmoduleid and rxmoduleid?
I can't believe that I'm the first one with this issue ;) Couldn't find any doc though :(
So I'm very thankful for any pointing in the correct direction/doc/example.
thanks
Soko
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26