Watching this thread with some interest as I, like Greg, would like to see the “Debug” alerts over OVMS. I would note that if the goal is to have OVMS show what the VDS shows, if you have the Roadster set to “Show Debug”, then OVMS will not show what VDS shows. Is it possible to track the status of “Debug reporting to VDS” in the car, and have the OVMS server relay accordingly? Thanks, and apologies for jumping in. Chip Sent from my tablet On Thu, Oct 31, 2019 at 1:30 AM +0100, "Mark Webb-Johnson" <mark@webb-johnson.net> wrote: The server doesn’t have any per-vehicle configuration (other than authentication), so not sure how this could be easily done server side. A kludge might be to pickup the notification event in a javascript on the module, and then raise a new different textual event for specific IDs - but not sure if the vehicle module javascript framework gets enough about the raised notification in order to do that. An alternate kludge would be to manually list vehicle IDs to be exempted from the DMC policy in the ovms_server.conf file, and have code to check that in ovms_server.pl. But, that said, I’m not really sure why we would want this. Our goal has always been to mirror what it says on the little VDS in the car, and that doesn’t show these debug-only alerts. The solution we have is not perfect, but it does avoid the worst of them. I have received so many support questions and concerns from roadster users of OVMS asking about these over the years - Tesla is aware that they false positive so labelled them as debug-only, so why would we want to bombard the user with these alerts every time he drives/charges the car? Regards, Mark. On 31 Oct 2019, at 7:39 AM, Greg D. <gregd2350@gmail.com> wrote: Bummer. Can we make this configurable? While I understand that debug messages aren't intended to be seen by the user, in the 10 years since these cars launched we have come to know a lot more about some of the, um, "quirks" in their design. These alerts can be important! Greg Mark Webb-Johnson wrote: Greg, Yes, this change to the server code: * bcc02c27 Ignore DMC push alert messages That won’t notify debug-only messages, but will still continue to notify the user-visible ones (to better mimick the behaviour in the car itself). Including, for the roadster: 1144=DMC: Powertrain Problem Service Required 1146=DMC: Motor Fan Problem Regards, Mark. On 31 Oct 2019, at 7:01 AM, Greg D. <gregd2350@gmail.com> wrote: Hi folks (Mark, probably), Interesting... My Tesla Roadster has been having trouble with its PEM fan, causing a bunch of 1146 Alerts to be generated while driving and/or charging. I've been monitoring the situation via OVMSv3. The alerts suddenly stopped a bit over a week ago. Other events continue to be received (charge start, stop, key in / door open, etc.), but not the 1146's. I do a monthly download of the car logs, and to my surprise (and disappointment), the 1146s are still happening. Was there a change to the plumbing somewhere such that these diagnostic alerts (perhaps versus user-visible events) are now being filtered out? Thanks, Greg _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev