If the problem appear on AC you use 230V or 110V? I tested now but not reproduce, only the type of charging (type1 ...) not show when i reboot the OVMS module when the charging at almost full. [image: Screenshot 2020-04-18 at 17.24.43.png] [image: Screenshot 2020-04-18 at 17.27.47.png] Tamás Kovács <kommykt@gmail.com> ezt írta (időpont: 2020. ápr. 18., Szo, 5:41):
Please send the following command output during charge. AC (Type1) or DC(CHAdeMO charge the problem?
*me li v.c.*
Michael Eric Menk <mikeemenk@gmail.com> ezt írta (időpont: 2020. ápr. 17., P, 21:38):
On 17.04.2020 20:51, Tamás Kovács wrote:
What is the previous version of OVMS fw installed. The charge detection commited at 2019 dec 25 the next OVMS release is 3.2.009.
My previous version is 3.2.008
No crash/reboot/fw update during charge?
No, completely stable. But I do not have a SD car installed for logging.
But it is partially working...
The DC kWh number is stored and updating when charging.
the only place I find that it updates is inside :
if (StandardMetrics.ms_v_charge_inprogress->AsBool()) { ms_v_charge_dc_kwh->SetValue((ms_v_charge_dc_kwh->AsFloat() + (StandardMetrics.ms_v_bat_power->AsFloat() / -360000.0))); }
This indicates that the StandardMetrics.ms_v_charge_inprogress is set correctly, but there is no charge status in the app, command-line or on web-page. _______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev
-- Üdvözlettel: Kovács Tamás
-- Üdvözlettel: Kovács Tamás
