I think we are pretty much ready to go. I just need to make the sdkconfig.default for v3.0 and v3.1. So long as it works for v3.0 developer hardware, that is fine. @Steve can you update our master clone to latest from Espressif and make sure your stuff is still ok? I guess steps for developers will be: 1) pull the openvehicles IDF and switch to master branch. Sub module update. 2) download and install xtensa build chain to match. 3) update OVMS master, make clean, check menu config, then build and play. I can get my part done by Sunday 14th night (HKT), so suggest to do the Merge of the OVMS firmware master branch then. Regards, Mark
On 13 Jan 2018, at 4:44 AM, Stephen Casner <casner@acm.org> wrote:
We expect production OVMS to be based on release/v3.1 of esp-idf in order to incorporate the support for SPIRAM (PSRAM).
I'd like to set a target for all develpers to move to the master branch of openvehicles/esp-idf that contains the finished version of my modifications to support the "module memory" command. At the same time I need to then merge the corresponding changes from my temporary branch in openvehicles/Open-Vehicle-Monitoring-System-3 to the master branch there since the API between the two has changed.
In other words, we need a flag day.
-- Steve _______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev