How can i debug what's the problem? I get the following crash (source code on my github: https://github.com/KommyKT/Open-Vehicle-Monitoring-System-3): I used the latest openvehicle updates + my mitsubishi code. I create the firwmare with make app, then upload to my NAS and update via OTA update.
Welcome to the Open Vehicle Monitoring System (OVMS) - Async Console
Firmware: 3.1.011-244-g1a15127d-dirty/ota_0/main Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/1 OVMS> ***ERROR*** A stack overflow in task OVMS DukTape has been detected. abort() was called at PC 0x40096278 on core 1 Backtrace: 0x40096064:0x3ffc11b0 0x4009625f:0x3ffc11d0 0x40096278:0x3ffc11f0 0x40091704:0x3ffc1210 0x40093768:0x3ffc1230 0x4009371e:0x3ffc1250 0x7aad5675:0x3f81d8f4 Rebooting... ets Jun 8 2016 00:22:57 rst:0xc (SW_CPU_RESET),boot:0x3b (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4960 ho 0 tail 12 room 4 load:0x40078000,len:7416 ho 0 tail 12 room 4 load:0x40080000,len:8344 entry 0x4008037c I (882) spiram: SPI RAM mode: flash 40m sram 40m I (882) spiram: PSRAM initialized, cache is in low/high (2-core) mode. I (883) cpu_start: Pro cpu up. I (887) cpu_start: Starting app cpu, entry point is 0x40081668 I (877) cpu_start: App cpu up. I (1785) spiram: SPI SRAM memory test OK I (1786) heap_init: Initializing. RAM available for dynamic allocation: I (1786) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM I (1793) heap_init: At 3FFBCDA8 len 00023258 (140 KiB): DRAM I (1798) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM I (1805) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM I (1811) heap_init: At 4009D560 len 00002AA0 (10 KiB): IRAM --