30 Apr
2018
30 Apr
'18
2:10 p.m.
Our default factor of 182 for the 12V ADC converter seems to be too low on current 3.1 production modules. Calibration results from three modules: * 192.35 * 199.15 (that's mine) * 200.2 So the default was way off on these. If these values are typical, our default should be around 197. Can some please check their modules and provide some more factors to verify this? Regards, Michael -- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26