Hi Nikki, not sure yet, I also had this effect once short before charge end. I assumed it was some kind of RAM corruption as I had other RAM effects around then too. Btw, the alert values are deviations, i.e. "SD" = standard deviation and "+4075mV" would mean cell 1 is 4.075 V above average -- that's of course nonsense. You can query the values using the "BATT V" and "BATT T" SMS commands, and you can reset by "BATT R". Could be useful if you fetch the BattPack and BattCell history msgs before and send them to me. Thanks, Michael Am 06.06.2013 11:34, schrieb Nikki Gordon-Bloomfield:
Hi guys
Just got the following message from my car:
"Volts: !SD:4075mV !C1:+4075mV Temps: !SD:225C !M1:-1C"
It's about 10 degrees C right now, and SOC is reported as 82 percent. Any ideas what's going on? I can tell the voltage is okay… but the temperature warning???
Nikki.
_______________________________________________ OvmsDev mailing list OvmsDev@lists.teslaclub.hk http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-- Michael Balzer * Paradestr. 8 * D-42107 Wuppertal Fon 0202 / 272 2201 * Handy 0176 / 206 989 26