2 May
2018
2 May
'18
6:55 a.m.
On Wed, May 02, 2018 at 03:43:33PM +0200, ovms wrote:
Tom, you are right. I used a standard cable, not a Leaf-specific cable. And the 0x50d is on the car-bus. I have now swapped to a Leaf-specific cable, and tried to change the code to look for 0x50d on the car bus, but I apparently did something wrong. No data from the car-bus is received now.
Can you try to see if adding this code also works for you? After "case 0x1db:" // state of charge percentage, as shown on dash info panel uint8_t soc = d[4] & 0x7f; if(soc != 0x7f) { StandardMetrics.ms_v_bat_soc->SetValue(soc); }