The ‘user interrupt’ is just the error code that comes back from the PPP driver when the cellular link goes down. We’d really need a log file to see what the issue is. Regards, Mark.
On 21 Nov 2021, at 1:57 AM, Craig Leres <leres@xse.com> wrote:
I updated my for-v3.3 build yesterday and booted it on my esp v3 board with the SIM7600 board. After running for a day, as usual, the simcom is not happy. Is this a side effect of not having hardware flow control for the modem uart?
I remember we had the "User Interrupt" bug a long time ago but I don't remember the details or how that got fixed.
Craig
Welcome to the Open Vehicle Monitoring System (OVMS) - SSH Console Firmware: 3.2.017-112-g4af06660/ota_0/main Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/3
OVMS# cel MODEM Status Model: SIM7600 Network Registration: RegisteredRoaming Provider: AT&T Hologram Signal: -93 dBm Mode: LTE,Online State: NetLoss Mux: Status up PPP: Not connected Last Error: User Interrupt GPS: Connected on channel: #1
_______________________________________________ OvmsDev mailing list OvmsDev@lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev