…done & pushed: _hologram:_ OVMS > level debug simcom Logging level for simcom set to debug I (141948) ovms-server-v2: Incoming Msg: MP-0 C41,*100# D (141948) simcom: tx mcmd ch=4 len=22 : AT+CUSD=1,"*100#",15|| I (141948) ovms-server-v2: Send MP-0 c41,0 D (141968) simcom: rx line ch=4 len=2 : OK D (143758) simcom: rx line ch=3 len=15 : +CUSD: 0,"IMSI: D (143758) simcom: rx line ch=3 len=19 : 234507098581638",15 D (143758) simcom: rx line ch=4 len=15 : +CUSD: 0,"IMSI: D (143758) simcom: rx line ch=4 len=35 : +CUSD: 0,"IMSI:|234507098581638",15 I (143758) simcom: USSD received: IMSI:|234507098581638 I (143758) events: Signal(system.modem.received.ussd) I (143758) ovms-server-v2: Send MP-0 c41,0,IMSI:|234507098581638 _congstar (Telekom Germany):_ I (66394) ovms-server-v2: Incoming Msg: MP-0 C41,*100# D (66394) simcom: tx mcmd ch=4 len=22 : AT+CUSD=1,"*100#",15|| I (66394) ovms-server-v2: Send MP-0 c41,0 D (66454) simcom: rx line ch=4 len=2 : OK D (68444) simcom: rx line ch=3 len=44 : +CUSD: 0," Aktuelles Guthaben: 8.29 EUR.",15 D (68444) simcom: rx line ch=4 len=44 : +CUSD: 0," Aktuelles Guthaben: 8.29 EUR.",15 I (68454) simcom: USSD received: Aktuelles Guthaben: 8.29 EUR. I (68454) events: Signal(system.modem.received.ussd) I (68454) ovms-server-v2: Send MP-0 c41,0, Aktuelles Guthaben: 8.29 EUR. "*100#" is the account balance check on prepaid SIMs by congstar. I haven't found any list of USSD commands supported by hologram. "*100#" obviously returns the current IMSI id. I tested some commands for JT global, but without success. Regards, Michael -- Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
